Extrusions
Architen Landrell offer a wide range of standard and specialist keders and extrusions. Below are a range of our extrusions. For prices, more specialist requirements and for information on keder, please contact us on 01291 638200
Single shotgun extrusion is ideal for tensioning as it has a track in the base which has been designed to take M10 hex head bolts. This gives a choice of hidden tensioning by pulling to an up-stand or by attaching to an eye nut and using a rigging screw.
Double shotgun extrusion has been designed with facetted structures in mind. The extrusion is ideal for fixing to curved steel and joining sections to one another. The extrusion also allows for structures of varying heights.
Banner track is used when there is a need to make a multi-facetted structure look as thought it is one large area with a minimum join line. It is ideal for advertising, signage and printed fabrics. It is rebated to take M10 bolts for fixing.
P section extrusion is best used in recessed areas such as skylights and window apertures, or where access is limited. It takes a maximum 8mm keder.
Locknut box extrusion is designed for outer and inner skins. It allows for an air gap or area that can be insulated. This section has a rebate for M10 bolts for fixing.
