Projects > Play Pavilion, Serpentine 2025




In summer 2025 the Serpentine and the LEGO Group opened the Play Pavilion, designed by Sir Peter Cook, beside Serpentine South in Kensington Gardens, London. It was open from 11 June to 10 August 2025. Its roof is a dome of orange steel tubes covered in a translucent skin of printed PVC fabric. Stage One built the pavilion, and Architen Landrell designed, engineered, made and fitted the canopy: about 150m² of printed PVC-coated polyester, tensioned over the dome.
The dome is a triangulated frame of steel tubes sitting on a ring beam 10.24m across. The fabric is pulled over the frame and fixed down to the ring beam, so fabric and steel work together to carry wind and snow loads. The canopy is printed in warm shades of orange, from deep red-orange to pale peach, so daylight comes through in colour and the dome glows from inside.
The canopy is a light (Type I) PVC-coated polyester: a woven polyester base cloth coated in PVC. It is strong, takes print well and welds cleanly, and a translucent grade lets light through the printed colours. The fabric was printed by a specialist printer, then cut and welded into a single skin in our factory in Chepstow.
We took the geometry from the design team’s BIM model, then form-found the canopy, checked it under wind, snow and rain (including ponding, where water could collect on flatter areas) and produced the cutting patterns. The membrane analysis was carried out for us by Tensys, working alongside the client’s engineer, AECOM. The fabric is prestressed to 0.75 to 1.0 kN/m, and under the design loads its peak stress is about 4.3 kN/m, around a tenth of its 42 kN/m strength.
The canopy turns the dome into a light, colourful roof that lets daylight through. Printed fabric suits temporary pavilions like this: it is light, it can carry any colour or image and it comes down easily at the end of the season. We have worked at the Serpentine before, on the 2015 Serpentine Pavilion and the fabric roof of the Serpentine Sackler Gallery, now Serpentine North. See more temporary and event structures.
What is a geodesic dome canopy made of?
A frame of triangles, usually steel or aluminium tubes, covered with a tensioned fabric such as PVC-coated polyester. The fabric can be translucent and printed, so daylight comes through in colour.
Can PVC fabric be printed?
Yes. PVC-coated polyester can be printed with colours, gradients, logos or images. On a translucent fabric the print glows when light shines through it, by day from the sun and at night from lighting inside. The artwork is laid out around the seams before the fabric is cut and welded.
How long does a fabric canopy like this take to make?
For the Play Pavilion, the programme allowed about two weeks for preliminary design, two for detailed design and two for manufacture, before fitting on site.
Photos: The Play Pavilion, designed by Peter Cook (Peter Cook Studio Crablab), in collaboration with Serpentine and the LEGO Group. © Peter Cook (Peter Cook Studio Crablab). Courtesy Serpentine, picture by Andy Stagg (main image); Stage One (canopy details); Architen Landrell (steel frame).

A rainbow wormhole ready to suck you into another dimension? A psychedelic pupa? A beguiling, colour-changing...

Based on the iconic quilted Chanel handbag, architect Zaha Hadid and her team were tasked...

Fabric is a versatile material that can adapt to different seasons and occasions, but it...