Skip to content
The curved white fabric shell of a new stand at Lord’s Cricket Ground beside the Media Centre
Facade cladding

Fabric facade cladding

Architen Landrell designs, makes and installs fabric cladding for stadia, buildings, car parks and bridges: flat and shaped panels, mesh screens, brise soleil and printed facades. Panels are made in our factory in Chepstow, UK.

Reviewed by Ceri Richards, Head of Design Updated October 2026

Lord’s Cricket Ground · London, UK
Already have fabric cladding? Cleaning, repairs and new panels
Overview

What is fabric facade cladding?

Fabric facade cladding is architectural fabric tensioned over the outside of a building, as flat panels, shaped panels or open mesh. It gives a new or existing building a new face, screens plant, shades glazing and can carry a print.

Fabric is much lighter than glass, metal or GRP, so the structure behind it can be lighter too, and it takes curves that would be costly in rigid materials. Panels are made in our factory and fitted in large pieces, so time on site is short. Mesh lets air and light through; solid fabric keeps the weather out. Both can be coloured, printed or lit. A tensioned cladding panel works like a small fabric roof turned on its side: it needs enough pre-stress to stay taut and crease-free in the wind, as our guide to tensile membrane design explains.

30+ years
design life of PTFE glass, which is also self-cleaning
15–30
years’ life for PVC polyester, depending on the grade
Open mesh
lets plant behind it breathe and daylight in, while it screens the view
Lighter
than glass, metal or GRP, so the structure behind it can be lighter too
UV-stable
dyes keep outdoor prints from fading; prints inside do not need them
Recyclable
PVC cladding can be taken down and recycled, as the London 2012 cladding was
The London 2012 Aquatics Centre with one of its temporary fabric-clad wings rising beside the curved roof
Temporary cladding

Wings that came down after the Games

The London 2012 Aquatics Centre grew from 2,500 to 17,500 seats with two temporary stands, 50 m high, clad in 25,000 m² of solid and mesh fabric. We made them over eight months and fitted them by rope access. After the Games the fabric came down and was recycled.

London 2012 Aquatics Centre · London, UK
What we build

Grandstands, plant screens, car parks, printed facades and brise soleil

Fabric on the outside of a building can change how it looks, hide what it should not show, shade its glazing or carry a brand. These are the things we are asked to make most.
  • The scalloped grey fabric edge of the grandstand roof at Alexander Stadium against a blue sky

    Stadium and grandstand cladding

    Roofs, backs and gables of stands in fabric that takes tight curves. At Alexander Stadium, Birmingham, a light grey skin wrapped a new grandstand in 2011.

  • Aerial view of the London 2012 International Broadcast Centre, its long facade screened by pale mesh fabric panels

    Screening plant and buildings

    Panels that hide plant and industrial facades but let air through. On the International Broadcast Centre, 33 mesh panels screen the plant.

  • Lit fabric sails on the front of the Stratford car park at dusk, above shops

    Car parks

    A new face for a multi-storey car park without rebuilding it. In Stratford, 11 fabric sails, lit from below, front the car park.

  • The purple and pink printed fabric wrap around the media wall at Liverpool Lime Street

    Printed facades and media walls

    Fabric carries a print at the scale of a building. In Liverpool, a sculpted printed wrap surrounds a 36 m video wall.

  • Cream fabric brise soleil curving along the timber-clad upper floor of the Eton College boathouse

    Brise soleil and solar shading

    Fabric shades that cut solar gain and glare. PTFE glass brise soleil shade two faces of the Eton College boathouse at Dorney Lake.

  • ETFE facades

    Need a clear or printed ETFE facade?

    ETFE cushion and single-layer facades, like the Kelana Jaya LRT tunnel in Kuala Lumpur, are on our ETFE page.

    ETFE facades
Stadia

Stadium and grandstand cladding

Fabric can give a stand the sculpted look of GRP or metal for much less. At Lord’s, WilkinsonEyre wanted the new Compton and Edrich Stands to match the Media Centre, whose shell is made of GRP panels, each a different shape.

Repeating that in GRP across two much larger stands would have been very expensive. We made the roof and facade from over 1,300 m² of PVC polyester instead: lighter on the structure, quicker to install and much less costly. For a seamless line off the back of each stand, the fabric meets an aluminium bullnose folded in two directions, and on site our crew used augmented reality to check the brackets on the timber gridshell against the model.

Why fabric for stadia
  • Much lighter than GRP, metal or glass, so the structure behind it can be lighter

  • Made in our factory in large panels, so installation is quick

  • Takes double curves and sculpted forms that are costly in rigid materials

  • Solid fabric keeps the weather out; mesh lets air and light through

  • Can be temporary: the London 2012 Aquatics Centre wings came down after the Games

  • Phthalate-free PVC fabrics, as used on the London 2012 venues

  • The timber gridshell and fabric roof of a new stand at Lord’s, above white seats

    Lord’s: 1,300 m² of PVC polyester roof and facade framing the upper tiers

  • One of the temporary wings of the London 2012 Aquatics Centre, clad in large flat fabric panels

    London 2012 Aquatics Centre: flat panels up to 250 m² on a 50 m high wing

  • The Alexander Stadium grandstand from the side, its roof and gable clad in curved light grey fabric with a scalloped edge

    Alexander Stadium: curved panels on the roof and gable, with a scalloped edge

  • Inside the Jakarta International Velodrome: the cycling track under the white fabric roof and acoustic liner

    Jakarta Velodrome: fabric roof with an acoustic liner beneath

How it works

Flat panels, shaped panels, mesh and sculpted forms

Most fabric cladding is a set of panels, each tensioned on its own frame or track and fixed to the building’s structure. The panel type depends on the look you want, the wind loads and whether air and light need to pass through.
  • Flat panels

    Fabric tensioned in aluminium extrusions on the building’s frame. For the Aquatics Centre we developed a reusable track that spans further than any fabric support extrusion we had made before, for panels up to 250 m².

  • Shaped panels

    Panels given a curve or a twist, which looks softer and helps the fabric carry its loads. The Alexander Stadium skin curves in plan, and at Lord’s the fabric meets a double-curved aluminium edge.

  • Mesh screens

    Open-weave fabric that lets air and light through while it screens the view. The International Broadcast Centre plant still ventilates behind 5.3 × 18 m mesh panels.

Jakarta International Velodrome

Shaping a flat wall, and fitting it fast

The velodrome’s walls were designed as flat panels. We added shape to help the fabric carry its loads: each panel slides into place, then a shaping bar is pushed into the back of the fabric and tensioned, giving it a three-dimensional form. We mocked the detail up in the UK for the architect and client to sign off, it made installation very quick, and we have used it on several projects since.

Jakarta International Velodrome and its fabric-clad walls from the air
Buildings

Cladding buildings, car parks and bridges

Fabric can give a tired or industrial building a new face without rebuilding it. It fixes to the existing frame, hides plant and services, and can be changed later when the building or its brand changes.

  • International Broadcast Centre, London 2012: 33 mesh panels screen the plant on a 4,500-tonne steel building. Today the tenant can swap them for branded panels, and LEDs light them at night.
  • Stratford car park: 11 fabric sails on steel frames, fitted by crane over a busy street, give a multi-storey car park a new face.
  • Cardiff Bay Tube: a tailored PVC skin over Will Alsop’s plywood visitor centre, a Cardiff landmark from 1990 until it made way for a road in 2010.
  • Plashet School Unity Bridge: PTFE fabric wraps a footbridge between two school sites in East Ham, in soft shapes over identical steel ribs. RIBA Award 2001.
  • Olympic Park bridge, London 2012: printed temporary cladding round an old bridge, with a translucent centre and ETFE window over a water feature.
  • World Expo 2025, Osaka: fabric cladding for three national pavilions: Australia, Canada and the USA. The Australia Pavilion has 8,500 m² of fabric facade, walls and cushion roof.
Purple fabric-clad footbridge at Plashet School, East Ham

Car parks and tired buildings

Fabric is a cost-effective, low-maintenance way to change how a building looks straight away. Send us photos and elevations, and we will show you how it could work.

Discuss your building
Solar shading

Brise soleil and solar shading

Fabric shades cut glare and solar gain on glazed facades. A fabric brise soleil stops the sun outside the glass, before it heats the rooms behind.

  • PTFE glass, as at Eton, is self-cleaning and lasts 30 years or more
  • Fabric cuts glare and solar gain but still lets daylight through
  • We choose how open the fabric is, to balance shade, daylight and the view out
  • A sun path analysis shows where and when shade is needed

Send us the elevations and which way the glazing faces, and we will propose a shade.

PTFE glass brise soleil on the Eton College boathouse at Dorney Lake
Eton College boathouse, Dorney Lake. PTFE glass brise soleil, tensioned to the roof on stainless steel cables, shade the north-west and south-east faces of the building and glow at sunset.
Print

Printed facades and media walls

Fabric can carry a brand, an artwork or a message at the scale of a building, and the print can be changed when the brand or the event changes.

Dye sublimation

The ink is driven into the fabric with heat, so it stays bright, does not scratch off and survives the fabric being taken down and used again.

Inkjet

Ink sits on the surface: economical for banners and short-term branding, but not made to be reused.

Artwork that lines up

Artwork is drawn flat, but fabric stretches when it is tensioned. We shape the image to each panel’s cutting pattern and allow for the stretch, so it reads as one picture across every join.

Fixings out of sight

For an edge-to-edge print, the keder that holds each panel is welded to the back, with care so the heat does not mark the image on the front.

Outside or inside

Prints in sunlight need UV-stable dyes; prints inside a building do not.

Plan it with us

Image size and resolution, lighting, whether you need to see through it, how long it must last and the fire rating all decide the fabric and the method.

Printed fabric facade of the temporary climbing venue in Paris, 2024
Temporary climbing venue, Paris, 2024. 1,500 m² of printed PVC polyester: one image across 11 panels, the largest 8 × 32.25 m, with every fixing hidden behind the print.
Printed fabric wrap round the Liverpool 08 media wall
Liverpool media wall, 2008. A sculpted printed wrap round a 36 × 6.58 m video wall, its artwork corrected to read true once tensioned.
Printed fabric cladding on a bridge in the Olympic Park, London 2012
Olympic Park bridge, London 2012. Printed with the Games’ branding outside and “Inspire a Generation” inside.
Materials

Choosing a fabric for a facade

The fabric sets the look, how much light and air pass through, how long the cladding lasts and its fire classification. For London 2012 we used PVC fabrics made without phthalate plasticisers, which are easier to reuse. We will recommend a fabric for your building.

Choosing a fabric for a facade
Fabric What it does Used at
PVC polyester Strong, economical and easy to shape; white, colours or printed; 15–30 years, depending on the grade Lord’s, Alexander Stadium, Aquatics Centre, Stratford car park
PVC polyester mesh Open weave that lets air and light through and screens the view; can be printed International Broadcast Centre, Aquatics Centre
PVC glass Glass-fibre cloth with a PVC coating: stiffer and more stable than polyester, so tall flat panels stay true; translucent or blockout; can reach non-combustible classes Australia Pavilion, Expo 2025: walls up to 16.5 m
PTFE glass Glass-fibre cloth with a PTFE coating; self-cleaning and long-lasting, 30+ years Eton College boathouse, Plashet School Unity Bridge
Silicone glass Translucent glass-fibre cloth with a silicone coating; about 20–25 years Ask us where it suits your facade
ETFE foil Clear or printed foil, as cushions or single layers Olympic Park bridge window; ETFE facades have their own page

Source: Architen Landrell project and material pages. Design life depends on the fabric grade, the exposure and maintenance.

Colour, light and print

A facade can blend in or stand out.

The Australia Pavilion at Expo 2025 Osaka at dusk, its white fabric facade lit pink and purple
Australia Pavilion, Expo 2025 Osaka. By day sunlight filters through the PVC polyester facade; at night it becomes a canvas for coloured light.
An Architen Landrell rope access technician working on a white tensile fabric roof
Maintenance & repairs

Already have fabric cladding?

Our maintenance team cleans, re-tensions and repairs fabric cladding, and makes new or re-printed panels in our factory. We keep records of every structure we have built, so we know each one’s fabric and details.

  • Cleaning, including at height by rope access
  • Re-tensioning, so panels stay smooth
  • Inspection of fabric, fixings and tracks
  • Replacement panels made in our factory
  • New printed panels when a brand changes
  • Taking panels down and refitting them for building works

Maintenance team: +44 (0) 1291 638 200 · maintenance@architen.com

For architects and contractors

Planning and specifying fabric cladding

The earlier we are involved, the simpler the fixings and the cheaper the steelwork. These are the questions our engineers will ask, so it helps to have a view on them.

  1. What is the cladding for?

    A new look, screening plant, shading glazing, branding, or keeping the weather out. Often it is several at once.
  2. New or existing building?

    What the panels will fix to, and the loads the frame or the existing structure can take.
  3. Which panel type?

    Flat, shaped, mesh or sculpted. The look, the wind loads and the need for air and light decide it.
  4. Fire

    The fire regulations the facade must meet can change which fabric we use. On the Australia Pavilion in Osaka, Japan’s rules allowed PVC polyester on the feature facade, but the walls had to be non-combustible, so they are PVC glass. Involve us early and we will help you work out what is required.
  5. Light, air and view

    How much daylight should pass, whether plant behind must ventilate, and whether people need to see out.
  6. Access and maintenance

    How the panels and anything behind them will be reached for cleaning, inspection and repairs.
  7. Print, colour and lighting

    White or coloured fabric, a printed image or brand, and lighting at night.
  8. Programme and site

    Access for cranes and powered access, working over streets or railways, and any out-of-hours windows.
Cutting table in the Architen Landrell factory in Chepstow
How we deliver

A UK maker of fabric cladding, from first sketch to maintenance

We design, engineer, make, install and maintain fabric cladding ourselves, with steelwork from our group company, Metafab Structures.

Since 1982
designing and building tensile structures
In-house
design, manufacture, installation and maintenance
6 continents
where our structures stand
9 welders
high-frequency and PTFE fabric welders in our Chepstow factory
FAQs

Fabric cladding questions

Can’t see your question? Ask an engineer.
What is fabric facade cladding?

Architectural fabric tensioned over the outside of a building, as flat panels, shaped panels or open mesh. It gives a building a new face, screens plant, shades glazing and can carry a print.

Why use fabric instead of GRP, metal or glass?

Fabric is much lighter, so the structure behind it can be lighter, and it takes curves that are expensive in rigid materials. At Lord’s, fabric matched the look of a GRP shell for much less, and was quicker to install.

Can fabric cladding go on an existing building or car park?

Yes. Panels fix to the existing frame or to new steelwork, as on the International Broadcast Centre and the Stratford car park. We check what the structure can carry first.

Can it be printed or branded?

Yes. We print artwork, logos and images onto the fabric, often by dye sublimation so the print lasts and the panels can be reused. Prints outside use UV-stable dyes.

Does it let air and light through?

It can. Mesh fabrics let plant ventilate and daylight in while they screen the view; solid fabrics keep the weather out. We choose the openness for what you need.

How long does fabric cladding last?

It depends on the fabric: PTFE glass 30 years or more, PVC polyester 15 to 30 years depending on the grade, silicone glass about 20–25 years and mesh fabrics 15–20 years, with the right maintenance.

Is fabric cladding fire rated?

Fabrics are tested to fire standards, and the fire regulations a facade must meet can change which fabric we use. On the Australia Pavilion at Expo 2025, Japan’s rules allowed PVC polyester on the feature facade and the top layer of the roof cushions, but the walls and the lower cushion layer had to be certified non-combustible (Funen), so they are PVC glass. That is one reason to involve us early: we will help you understand the requirements for your building.

Can the cladding be temporary?

Yes. The London 2012 Aquatics Centre wings came down after the Games and their fabric was recycled, and the Olympic Park bridge cladding was designed as temporary too. Demountable and event structures are on our Temporary structures page.

Talk to an engineer

Planning fabric cladding, or looking after it?

Send us a sketch, drawings, photos or a short description and one of our engineers will come back to you.

+44 (0) 1291 638 200 mail@architen.com Architen Landrell, Station Road, Chepstow, NP16 5PF, UK

"(Required)" indicates required fields

Your enquiry is about(Required)
Accepted file types: jpg, jpeg, png, gif, pdf, dwg, dxf, Max. file size: 128 MB.
Call us Enquire