Skip to content
The white fabric entrance canopy on the London Eye pier, with the Houses of Parliament across the Thames
Fabric canopies

Entrance, walkway & transport canopies

Architen Landrell designs, makes and installs tensile fabric canopies for building entrances, covered walkways, bus and rail stations, airports and hospital drop-offs. Each one is engineered for its site and made in our factory in Chepstow, UK.

Reviewed by Ceri Richards, Head of Design Updated October 2026

The London Eye · London, UK
Already have a fabric canopy? Cleaning, repairs and new fabric
Overview

What is a tensile fabric canopy?

A tensile fabric canopy is a lightweight roof of architectural fabric, pre-stressed into a curved shape between masts, arches, cables or a building. It keeps people dry and shaded where they arrive, wait and walk, and its shape keeps it taut, so it can span a doorway, a route or a bus bay with very few supports.

A canopy is often the first part of a building people see. It marks the way in, gives a busy place an identity and, lit at night, becomes a landmark of its own. Almost every fabric canopy is built from three basic shapes, the hypar, the cone and the arch, or a mix of them; our guide to tensile canopy shapes explains how each one carries rain, snow and wind.

30+ years
design life of PTFE glass, which rain washes clean
15–30
years’ life for PVC polyester, which comes in colours and can carry a logo
Up to 42%
of daylight through white silicone glass
About 1%
of the weight of glass: ETFE for clear canopies and rooflights
5 days
or less to put up ten bays of a ready-designed walkway
24-hour
emergency response from our maintenance team
The white PTFE canopy with a round ETFE rooflight outside the emergency department at the South West Acute Hospital, Enniskillen
Hospital canopies

An ambulance canopy that won an award

At the South West Acute Hospital in Enniskillen, 200 m² of PTFE glass fabric shelters ambulance crews, patients and visitors outside A&E, with a round ETFE rooflight around the central mast. It won an IAA Award of Excellence in 2012.

South West Acute Hospital · Enniskillen, UK
What we build

Entrances, walkways, stations and drop-offs

Each canopy is designed around its site: the route people take, what passes beneath it and where the rain should go. These are the canopies we are asked for most.
  • The twin-coned fabric canopy over the Tiltyard entrance at the Royal Armouries, Leeds

    Entrance canopies

    Canopies that keep a doorway dry and mark the way in. At the Royal Armouries in Leeds, a twin-coned fabric canopy on a single steel mast frames the entrance to the Tiltyard.

  • The white fabric walkway canopy outside the Victorian building at Evelina Children’s Hospital

    Covered walkways and links

    Dry, daylit routes between buildings. At Evelina Children’s Hospital in London, a fabric walkway links a Victorian hospital building to the new children’s hospital.

  • Inverted fabric cones over the bus stands at Stratford bus station, London

    Bus, rail, tram and airport canopies

    Shelter for passengers that stands up to traffic, crowds and weather. At Stratford bus station, uplit PTFE cones channel rain into drains at their base and stay bright after years of traffic fumes.

  • The curved fabric canopy over the ambulance drop-off at Downe Hospital

    Hospital entrances and ambulance bays

    Canopies tall enough for ambulances that need little maintenance. At Downe Hospital, one canopy leans out over the road so high vehicles can pull up close, and a second shelters the walkway.

  • Four joined inverted fabric umbrellas along the front of the retail park at North Road, Preston

    Retail, leisure and showroom frontages

    A landmark for passing traffic and shelter for visitors. At North Road, Preston, four inverted umbrellas join into one canopy and carry rainwater down their columns.

  • Outdoor spaces

    Covering a playground or terrace?

    Free-standing shade for schools, courtyards and terraces has its own page, and so do ETFE canopies.

    Shade & shelter
How fabric canopies work

Four canopy forms

Most canopies use one of four forms, or join several together. The form decides how many supports you need, how the canopy meets the building and where the rain goes.

Cone

Cone: fabric pulled up to a ring at the top of a mast, with cable edges between lower fixing points.

Fabric pulled up to a ring at the top of a mast, with cable edges between lower fixing points. A strong landmark over an entrance, as at the Royal Armouries and Ford Direct, Stevenage.

Inverted umbrella

Inverted umbrella: fabric dips to a single column, and rainwater runs down inside the column to a drain.

Fabric dips to a single column, so the canopy needs no other supports and rain runs down inside the column. Used at North Road, Preston and at Kingshurst Academy, where two offset umbrellas form the entrance.

Barrel vault

Barrel vault: fabric stretched over a row of arches to cover a walkway; the arches repeat along the route.

Fabric stretched over a row of arches that repeats along the route. The natural choice for covered walkways, as at Edinburgh Airport and Sedgehill School.

Cantilever and wing

Cantilever: a canopy fixed to the building on steel arms, held by tie rods, with a gutter beam along its low edge.

Fabric carried on steel arms that reach out from the building or a line of columns, leaving the ground below clear, as at Sainsbury’s High Wycombe and Edmonton Green bus station.

Where the rain goes

Every canopy is designed with a route for its rainwater, so it lands where it should.

Down the column

Down the column: an inverted cone collects rain at its centre and it runs down inside the column to an underground drain.

Inverted cones collect rain at the centre and take it down inside the column to a drain, as at North Road, Preston. At West Bromwich bus station, rain runs down the steel spars and inside the columns.

Off the edge

Off the edge: rain runs to the low edges and corners of the fabric, and drips off or is caught by a gutter or diverter.

Most canopies shed rain to their low edges and corners. A gutter or diverter can carry it away from doors and paths.

Into a gutter

Into a gutter: a canopy slopes to a gutter beam along its low edge, which drains down a post or the building.

The canopy slopes to a gutter beam along its low edge, as at Sainsbury’s High Wycombe, or leans to send water away from people walking below, as at Downe Hospital.

Diagrams are simplified. Every canopy is engineered for its own site, loads and drainage.

Ready-designed walkways

Designed and engineered in advance: ten bays go up in under 5 days.

  • A long covered walkway of white fabric on steel arches beside a school field

    Archframe

    3 m, 4.5 m or 6 m bays

    Arched bays that follow curving routes and changes in ground level.

  • Looking up at a fabric walkway canopy carried on branching steel arms from a central column

    Branchframe

    Central column

    Branching arms on a single central column. Modular, so it can be shaped to fit the space.

  • A fabric walkway canopy cantilevered from columns along a curved building wall

    Cantilever

    Downward arch

    A downward arch cantilevered from each column, along a building wall. Drainage can be included.

  • Rising fabric wings on single columns over a curved seating area outside a school

    Wingframe

    Rising arch

    A rising arch cantilevered from each column. Also used as an amphitheatre canopy or bicycle shelter.

Each comes in PVC polyester, PTFE glass or silicone glass, on steel columns painted in any RAL colour, with lighting from our specialist lighting partners, graphics available and foundations by others. Ready-designed entrance and drop-off canopies, such as double conics, inverted conics and umbrellas, are on our Shade & shelter page with the full range.

Materials

Choosing a fabric for your canopy

The fabric sets the canopy’s life, light, look and cost. Our engineers will recommend one for your site and budget.

Fabric comparison table
Fabric Design life Light and look Best for
PTFE glass 30+ years White or coloured; rain washes it clean Transport hubs, hospitals, landmark entrances
PVC polyester 15–30 years, by grade Many colours; can carry a logo or print; lacquer or nano top coats help it shed dirt Walkways, schools, shops and showrooms, demountable canopies
Silicone glass 20–25 years Bright white and available in colours; up to 42% light in white Bright canopies and walkways
ETFE 30+ years Clear or printed; about 1% of the weight of glass Bus and rail canopies that need lots of daylight

Source: Architen Landrell materials pages.

Lighting and branding

Fabric reflects light well, so a canopy can glow at night or carry a brand by day.

  • Uplighting

    Spotlights below the fabric turn a canopy into a lantern after dark, as at Swindon Parade, where the cones are lit from their columns.

  • Logos and prints

    PVC fabric can carry a logo or a printed design, such as the school logo on one of the two entrance canopies at Kingshurst Academy.

An Architen Landrell rope access technician cleaning a white tensile fabric roof
Maintenance & repairs

Already have a fabric canopy?

Our maintenance team inspects, cleans, repairs and re-skins fabric canopies, with a 24-hour response service for emergencies. We keep records of every structure we have built, so we know each canopy’s fabric and details. We also look after canopies built by other companies.

  • Yearly inspections and condition surveys
  • Professional cleaning, including by rope access
  • Repairs on site, or new panels made in our factory
  • Re-tensioning
  • New fabric fitted to the existing steelwork
  • Night and out-of-hours working on busy sites

Maintenance team: +44 (0) 1291 638 200 · maintenance@architen.com

For architects and clients

Planning and specifying a canopy

The earlier we are involved, the simpler the canopy and its foundations. These are the questions our engineers will ask, so it helps to have a view on them.

  1. What does the canopy cover?

    A doorway, a route between buildings, a bus or ambulance bay, or a whole forecourt.
  2. What passes underneath?

    People only, or buses, ambulances and delivery vans that need clear height.
  3. Fixed to the building, or standing on its own?

    Whether the building can take the loads, or the canopy needs its own masts and foundations.
  4. Where should the rain go?

    Down the columns, into a gutter, or off the edges away from doors and paths.
  5. Foundations and planning

    We supply the engineering information for your groundworks contractor, and drawings to support a planning application.
  6. A live site?

    Night and phased working keep stations, hospitals and shops open, as at Connolly Station in Dublin.
  7. Lighting and branding

    Uplights, LED colour washes, a logo or a printed design.
Cutting table in the Architen Landrell factory in Chepstow
How we deliver

A UK maker of fabric canopies, from first sketch to maintenance

We design, engineer, make, install and maintain every canopy ourselves, with steelwork from our group company, Metafab Structures.

Since 1982
designing and building tensile structures
In-house
design, manufacture, installation and maintenance
6 continents
where our structures stand
9 welders
high-frequency and PTFE fabric welders in our Chepstow factory
FAQs

Canopy questions

Can’t see your question? Ask an engineer.
What is a tensile fabric canopy?

A lightweight roof of architectural fabric, such as PTFE glass or PVC polyester, pre-stressed into a curved shape between masts, arches, cables or a building. The shape keeps the fabric taut, so it can cover an entrance, a walkway or a bus bay with very few supports.

PTFE or PVC: which fabric is best for a canopy?

PTFE glass has a design life of more than 30 years and rain washes it clean, so it suits transport hubs, hospitals and landmark entrances. PVC polyester costs less, comes in colours, can carry a logo and lasts 15 to 30 years, depending on the grade.

How long does a fabric canopy last?

PTFE glass has a design life of more than 30 years. PVC polyester lasts 15 to 30 years, depending on the grade, and regular cleaning and inspection help both last longer.

Where does the rainwater go?

Every canopy is designed with a route for its water: down inside the columns to a drain, into a gutter beam along a low edge, or off the edges away from doors and paths, with a gutter or diverter where needed.

Do I need planning permission for a canopy?

Not every canopy needs it, so check with your local planning authority before you order. We can provide drawings and information to support a planning application.

Who designs the foundations?

We supply the engineering information to your groundworks contractor, so they can design and build the foundations. Our price usually covers the structure above ground.

Can you replace the fabric on an existing canopy?

Yes. We survey the existing steel and fixings, make new fabric panels to fit them in our factory, and fit them with as little disruption as possible, at night if needed.

How often should a canopy be maintained?

We recommend an inspection every year, with cleaning as needed. A visit covers cleaning, repairs, a check of every fixing and fitting, and an inspection report.

How much does a fabric canopy cost?

It depends on the material, the design and how long it takes to make, so we don’t publish a budget price per m²: a single figure could be misleading. Send us drawings or a sketch and we will price your project.

Talk to an engineer

Planning a canopy, or looking after one?

Send us a sketch, drawings, photos or a short description and one of our engineers will come back to you.

+44 (0) 1291 638 200 mail@architen.com Architen Landrell, Station Road, Chepstow, NP16 5PF, UK

"(Required)" indicates required fields

Your enquiry is about(Required)
Accepted file types: jpg, jpeg, png, gif, pdf, dwg, dxf, Max. file size: 128 MB.
Call us Enquire