Skip to content
White fabric Ripple ceiling with integrated downlights in a modern office
Fabric interiors

Fabric ceilings & interiors

Architen Landrell designs, makes and installs fabric ceilings, atrium sails, screens and sculptures for offices, shops, stations, galleries and universities. Fabric cuts glare, softens echo and hides services, and every piece is made in our factory in Chepstow, UK.

Reviewed by Amy Richardson, Sales Director Updated October 2026

Ripple fabric ceiling · London office, UK
Already have a fabric ceiling? Cleaning, repairs and new panels
Overview

What is a fabric ceiling?

A fabric ceiling is architectural fabric tensioned on frames, cables or fins below an existing ceiling or roof. It is light, it can take almost any shape, and it hides what is above while still letting light, air and access through.

The same fabrics make atrium sails that take the glare off glass roofs, screens that divide a room without closing it in, and sculptures that give a building its centrepiece. Mesh and acoustic fabrics soften echo, and because fabric diffuses light, it glows evenly when it is lit. Inside a building the fabric is still tensioned into curves, which is what keeps a sail or ceiling free of creases; our guide to how tensile membranes work explains the pre-stress behind it.

85%+
of the light passes through the fabrics we use for Lightframe ceilings
B-s2,d0
fire class most light and mid-weight PVC polyester fabrics reach, to EN 13501-1
6 × 3.2 m
largest Lightframe panel: square, rectangular, triangular or curved
Hinged
Lightframe panels hinge down and Ripple fins lift out, to reach the services above
Mesh
lets air pass to the space above, and softens echo
DALI, DMX
controls for built-in LEDs that can change colour or mimic daylight
The smooth white arched fabric ceiling over the concourse at Dundee Station
Station concourses

A ceiling with no visible structure

At Dundee Station, a tensioned fabric ceiling lines the six-metre-high concourse in one smooth arch. The PVC polyester mesh lets air pass to the void above, so changes in temperature and humidity cause no condensation, and it takes the edge off the echo from the hard finishes.

Dundee Station · Dundee, UK
What we build

Ceilings, sails, screens, light features and more

Fabric inside a building does several jobs at once: it cuts glare, softens echo, hides services and gives the space a feature. These are the things we are asked to make most.
  • Removable fabric mesh ceiling panels in the link bridge at Vodafone headquarters

    Ceilings and linings

    Panels that hide services but still let light, air and access through. At Vodafone ’s headquarters, about 1,000 removable mesh panels line the link bridges, with downlights built in and chilled air passing through.

  • White triangular fabric sails spanning an atrium to control glare at NCFE Newcastle

    Atrium sails and glare control

    Sails that take the glare and heat out of a glazed roof or wall. At NCFE in Newcastle, five 4 m tri-sails cut the glare and the echo in a four-storey atrium.

  • Curved printed mesh partition screen separating restaurant and kitchen at BT Leavesden

    Screens and printed panels

    Fabric that divides a room without closing it in, or hides a view. At BT, Leavesden , a 120 ft curved mesh screen separates the kitchen from the staff restaurant.

  • Overlapping fabric cones diffusing daylight under skylights at BBC Caversham

    Light diffusers and features

    Fabric spreads light evenly and glows when lit. At BBC Monitoring , Caversham, overlapping stretch fabric cones under the roof lights cut the glare and glow like giant lampshades.

  • Interactive LED-lit inflated fabric wall pillows in the O2 flagship store

    Shops, restaurants and leisure

    Features that draw people in and hide the services above. In the O2 shop at The O2, inflated fabric pillows line two walls, lit by LEDs that change as shoppers come close.

  • Outdoor spaces

    Shading a space outside?

    Shade sails and canopies for playgrounds, terraces and entrances have their own pages, and so do fabric roofs for large spaces.

    Shade & shelter
Our retrofit ceiling system

Ripple fabric ceiling

Architen Ripple is a fabric ceiling we designed to go into an existing building with little disruption. Fabric fins slide into slim aluminium sections fixed to the ceiling, and together they form a rippling, cloud-like ceiling below it.

Every Ripple ceiling is designed for its room. The footprint, the wave profile and the colour of the fins are set by the space, the way it is used and the brand, so no two are the same, and the fins can even form a logo or a shape.

Why Ripple
  • Made off site as a kit of parts, and installed with hand tools by non-specialist labour

  • Laid out around existing lights, smoke alarms and services

  • Fins lift out for access to the ceiling above, and go back without specialist labour

  • Mesh fabrics soften echo in offices, meeting rooms and concourses

  • Lit with a colour wash round the edge, or with light on each fin

  • No ongoing maintenance, and any part can be replaced

  • Rippling white fabric fins of a Ripple ceiling above desks in an open-plan office

    Ripple in an open-plan office, with a warm colour wash round the edge →

  • Ripple fabric ceiling with circular halo lights above a meeting room table

    Ripple with halo lighting in a meeting room →

  • Ripple ceiling fins continuing down a corridor

    Our Chepstow office: the fins carry on along the corridor →

Modular ceiling system

Lightframe fabric ceiling system

Architen Lightframe is a modular system of slim aluminium frames skinned with light-diffusing fabric. It makes ceilings and walls that glow evenly from daylight or lights behind, as an alternative to a stretch ceiling, with panels that open for access.

Size and shape

Panels up to 6,000 × 3,200 mm, square, rectangular, triangular or curved, for ceilings, walls and outdoor soffits.

Even light

Fabrics that let through 85% of the light or more, with narrow joints and an elliptical frame that keep the surface practically free of shadows.

Access

Panels hinge down to reach the lights, ducts and services above.

Lighting

Daylight from above, or integrated LEDs on DALI or DMX controls that can mimic daylight, designed and installed with specialist lighting designers and manufacturers.

Sound

Acoustic fabrics and a second layer behind absorb reverberation.

Fire rating

The rating comes from the fabric chosen: usually B-s1,d0 to EN 13501-1, and A2 fabrics where the space needs them.

Feature pieces

Sculptural fabric and fabric sculptures

Fabric can be stretched over almost any frame or tensioned in several directions, so it makes features that would be heavy or costly in other materials: forms that float in an atrium, a brand colour in three dimensions, even a room. Most also cut glare and soften echo.
  • Spiky black tensile fabric seminar pod suspended in laboratory building

    Seminar pods, Blizard Building

    Four seminar pods hang from a laboratory ceiling in Whitechapel, London. The Spiky pod ’s one-tonne black skin was made in one piece, and the white Cloud pod is insulated for quiet meetings.

  • Illuminated white fabric petal sculptures suspended in an atrium

    BP petals, London

    Stretch fabric petals over steel frames, lit from inside with LEDs, hang at angles down the centre of BP ’s atrium.

  • Angular red tensile fabric sculpture suspended in multi-storey atrium

    Oracle, Reading

    A red angular sculpture in the company colour hangs high in the atrium at Thames Valley Park . Four winches on one remote lower it to the ground.

  • Four tall red fabric mesh cylinders suspended in office atrium

    Tower Wharf, Bristol

    Four red mesh cylinders, each 4.8 m high, hang on stainless steel cables in a four-storey atrium at Tower Wharf , and break up the echo.

  • Golden fabric changing-room pods lining an aisle in a House of Fraser store

    House of Fraser changing rooms

    Changing rooms made as soft fabric pods, patterned like garments, bring colour to the shop floor at House of Fraser .

  • Canopy of suspended translucent fabric leaf sculptures over seating area

    Barclays, Canary Wharf

    80 fabric leaves make a rainforest canopy over a seating area, one of five schemes in the bank’s atria at Canary Wharf .

Acoustics

Fabric for better acoustics

Glass, concrete and hard floors bounce sound around a room, so atriums, offices and halls echo. Fabric absorbs some of that sound. Any mesh fabric helps, and acoustic fabrics, or an absorbent layer behind the fabric, do much more.

Because the same fabric can also shade, diffuse light and look good, one ceiling or sail can solve several problems at once.

  • Hendon Quad, Middlesex University: four twin-skin fabric cones with absorbent linings quieten a glass-roofed quad that used to echo.
  • NCFE, Newcastle: five tri-sails reduce echo and glare in a four-storey office atrium.
  • Dundee Station: a mesh fabric ceiling takes the edge off the echo in the concourse.
  • Saga, Ramsgate: fabric wall linings improve the acoustics of a large call centre.
  • Cloud pod, Blizard Building: two layers of acoustic insulation make quiet meeting rooms inside a hanging fabric pod.
Twin-skin fabric cone with an absorbent lining in the glass-roofed quad at Middlesex University, Hendon

Acoustic fabrics in detail

Tested absorption figures for the fabrics we use, inside and outside, and how to choose one, are on our Acoustic fabrics page.

Acoustic fabrics
Materials

Choosing a fabric for an interior

The fabric sets how much light passes, how the surface looks, how it handles sound and air, and its fire rating. We will recommend one for your space.

Choosing a fabric for an interior
Fabric What it does Used at
PVC glass mesh Fine mesh that diffuses light, lets air through and softens echo; fire class depends on the grade Atrium sails, screens and ceiling panels: NCFE, Zvartnots, RMS for Girls
PVC polyester Solid or mesh; white, colours or blackout; can be printed Ripple fins, the Icon Outlet cloud ceiling, the Spiky pod
Stretch fabric Polyester or Lycra-based fabric that takes tight curves and complex shapes with a smooth finish Light diffusers, petals and sails: BBC Caversham, BP, Blenheim Palace
Acoustic fabrics and linings Fabrics engineered to absorb sound, or an absorbent layer behind an open fabric Hendon Quad, Saga call centre

Source: Architen Landrell project and product pages. Tested absorption figures are on our Acoustic fabrics page.

Colour, light and print

Fabric can carry a brand, a picture or a light show.

  • Colour

    Coloured fabric brings a brand into the room, like the red sculptures at Oracle and Tower Wharf and the orange cylinders at Barclays .

  • Lighting

    Fabric glows when it is lit from behind or within, as at Westgate Retail Park and Kings Walk . We design and install the lighting with specialist lighting designers and manufacturers, as at Selfridges and the Majestic .

  • Print

    Fabric can carry an image: a 12 × 5 m print of 1850s market traders at Borough Market , and a parkland scene that hides a sub-station at Clifford Chance .

An Architen Landrell rope access technician cleaning an architectural fabric structure
Maintenance & repairs

Already have a fabric interior?

Our maintenance team cleans, repairs and re-tensions fabric ceilings, sails and sculptures, and makes new panels in our factory. We keep records of every structure we have built, so we know each one’s fabric and details.

  • Cleaning, including at height by rope access
  • Re-tensioning, so sails and panels stay smooth
  • Replacement panels and fins made in our factory
  • Taking down and refitting for building works or window cleaning
  • New printed panels when a brand or artwork changes
  • Work planned around opening hours in occupied buildings

Maintenance team: +44 (0) 1291 638 200 · maintenance@architen.com

For architects, designers and clients

Planning and specifying a fabric interior

The earlier we are involved, the simpler the fixings and the installation. These are the questions our engineers will ask, so it helps to have a view on them.

  1. What problem are you solving?

    Glare or heat from a glass roof, echo, an untidy ceiling or services to hide, or a space that needs a feature. Often it is several at once.
  2. Ripple, Lightframe or bespoke?

    Our Ripple and Lightframe systems keep the cost and programme down; a bespoke ceiling, sail or sculpture suits a landmark space.
  3. What is above, and what needs access?

    Lights, sprinklers, smoke detectors, ducts and services above the fabric, and how often they need to be reached.
  4. Fire rating

    The rating the space needs. We will propose fabrics that meet it, such as B-s2,d0 PVC fabrics, or B-s1,d0 and A2 fabrics for Lightframe.
  5. Light, air and sound

    How much daylight should pass, whether air must move through, and any acoustic target.
  6. Fixings and loads

    What the fabric can hang from: existing steelwork, the soffit or new supports. We keep fixings light, and can clamp to existing steelwork or curtain walling without drilling.
  7. Access and timing

    Working at height in an occupied building, lifts and doorways for large panels, and any out-of-hours windows.
  8. Lighting, colour and branding

    White or coloured fabric, lighting, a logo or a printed image.
Cutting table in the Architen Landrell factory in Chepstow
How we deliver

A UK maker of fabric interiors, from first sketch to maintenance

We design, engineer, make, install and maintain every fabric ceiling, sail and sculpture ourselves, with steelwork from our group company, Metafab Structures.

Since 1982
designing and building tensile structures
In-house
design, manufacture, installation and maintenance
6 continents
where our structures stand
9 welders
high-frequency and PTFE fabric welders in our Chepstow factory
FAQs

Fabric ceiling and interiors questions

Can’t see your question? Ask an engineer.
What is a fabric ceiling?

Architectural fabric tensioned on frames, cables or fins below an existing ceiling or roof. It hides what is above, can take almost any shape, and lets light, air and access through. Our Ripple and Lightframe systems are two kinds, and we also design bespoke ceilings.

Do fabric ceilings help with acoustics?

Yes. Any mesh fabric absorbs some sound, and acoustic fabrics, or an absorbent layer behind the fabric, absorb much more, so atriums, offices and halls echo less. Tested figures are on our Acoustic fabrics page.

Are fabric ceilings fire rated?

Interior fabrics are chosen for the fire rating the space needs. The class depends on the product: most light and mid-weight PVC polyester fabrics reach B-s2,d0 to EN 13501-1, and some heavier ones C-s2,d0. Lightframe fabrics are usually rated B-s1,d0 to EN 13501-1, and A2 fabrics can be used where the space needs them.

Can I still get to the lights and services above?

Yes. Ripple fins lift out, Lightframe panels hinge down, and panel ceilings such as those at Vodafone and RMS for Girls are designed to be taken down and refitted for access.

How disruptive is installation?

Most interior fabric is made in our factory and arrives ready to fit, so time on site is short. Ripple goes up with hand tools, and the five tri-sails at NCFE took two days. We plan work at height around occupied buildings.

Can a fabric ceiling be lit, coloured or printed?

Yes. Fabric diffuses light, so it glows evenly when it is lit from behind, and the lighting can change colour. We design and install the lighting with specialist lighting designers and manufacturers. Fabrics come in white and colours, and can be printed with images or logos.

What is the difference between a fabric ceiling and a stretch ceiling?

A stretch ceiling is usually a PVC membrane clipped into tracks round the edge of a room. Our fabric ceilings use architectural fabrics on frames, cables or fins, so they can be shaped, lit and opened for access. Lightframe is our modular alternative to a stretch ceiling.

How do you clean a fabric ceiling or sail?

Most need very little. Panels can be taken down and sails lowered, as at Blenheim Palace, and our team cleans at height, by rope access where needed. See maintenance and repairs .

Talk to an engineer

Planning a fabric ceiling or interior, or looking after one?

Send us a sketch, drawings, photos or a short description and one of our engineers will come back to you.

+44 (0) 1291 638 200 mail@architen.com Architen Landrell, Station Road, Chepstow, NP16 5PF, UK

"(Required)" indicates required fields

Your enquiry is about(Required)
Accepted file types: jpg, jpeg, png, gif, pdf, dwg, dxf, Max. file size: 128 MB.
Call us Enquire