Skip to content
Two Architen Landrell rope access technicians working on a white tensile fabric cone roof
Maintenance

Book an inspection

A yearly inspection keeps a tensile fabric or ETFE structure taut, clean and safe, and finds small problems before they become expensive ones. We inspect structures we have built and structures built by other companies.

Reviewed by Amy Richardson, Sales Director Updated November 2026

Need a re-skin or replacement? Refurbishment, replacement and modification
Overview

Why inspect a tensile structure?

A tensile structure works because its membrane is held in tension. An inspection checks that it still is, and that the fabric or foil, the fixings and the steel are in good order.

Dirt, wind, sunlight and the occasional knock all take their toll. Left alone, a loose corner can start to flap, a blocked gutter can let water pond on the fabric, and a small tear can grow. An inspection finds these early, while the fix is quick.

We keep records of every structure we have built, so we know its fabric and details before we arrive. We also inspect and maintain fabric and ETFE structures built by other companies, in the UK and abroad.

Yearly
inspection we recommend for fabric structures
2–3 years
between cleans of ETFE foil
Twice a year
service for ETFE air handling units
24 hours
response service for emergencies
The inspection

What we check

Every inspection ends with an illustrated report: what we found, the options and a price for each.
  • Fabric or foil

    Tears, holes, worn or dirty areas, seams and welds, and how the membrane has aged.

  • Tension

    Whether the membrane is still taut, with no slack areas, creases or ponding. We re-tension where needed.

  • Fixings and fittings

    Every fixing and fitting: edge cables, clamp plates, corner plates, bolts and rigging screws.

  • Steel and supports

    Masts, arches and frames, their coatings and connections, and anything that has been knocked or altered.

  • Drainage

    Gutters, outlets and low points, so rain and snow run off as designed.

  • ETFE and moving roofs

    Air handling units, pipework and controls on ETFE cushion roofs, and tracks, drives and fabric on retractable roofs.

FAQs

Inspection questions

How often should a tensile structure be inspected?

We recommend an inspection every year for fabric structures, with cleaning as needed, and a re-tension check every year on very exposed sites. ETFE foil is usually cleaned every 2 to 3 years and its air handling units serviced twice a year.

Do you inspect structures built by other companies?

Yes. We inspect, maintain and repair fabric and ETFE structures built by other companies as well as our own.

What does an inspection include?

A check of the fabric or foil, the tension, every fixing and fitting, the steel and supports, the drainage and, where fitted, air handling units or drives. You receive an illustrated report with the options and a price for each.

What happens if you find a problem?

Small repairs can often be made on site. Larger repairs and new panels are made in our factory in Chepstow and fitted to the existing structure. If the fabric is near the end of its life, we can quote to re-skin or replace it.

What if a structure is damaged now?

Call us on 01291 638200. Our maintenance team has a 24-hour response service for emergencies.

How long does the fabric last?

PTFE glass and ETFE have a design life of more than 30 years, and PVC polyester 15 to 30 years depending on the grade. Regular inspection and cleaning help a membrane reach its full life. Our guide to how tensile structures work explains more.

Book an inspection

Tell us about your structure

Send us the site, the type of structure and a few photos, and our maintenance team will arrange a visit.

+44 (0) 1291 638 200 maintenance@architen.com Architen Landrell, Station Road, Chepstow, NP16 5PF, UK

"(Required)" indicates required fields

Roughly how big and how old it is, what you have noticed, and any dates that suit you for a visit.
Drop files here or
Accepted file types: jpg, jpeg, png, heic, pdf, Max. file size: 10 MB, Max. files: 5.
    Call us Enquire