Re-skinning
New fabric made to fit the existing frame, masts and cables. We check the steel and fixings, then pattern the new membrane from our records or a new survey. The fabric roof over our own factory was re-skinned after 30 years.
Architen Landrell re-skins, repairs, replaces, upgrades and alters tensile fabric and ETFE structures, including ones built by other companies. New fabric and cushions are made in our factory in Chepstow, UK, and usually fit the existing steelwork.
Reviewed by Amy Richardson, Sales Director Updated November 2026
Steel frames, masts and cables usually outlast the fabric they carry, so a new skin is often the best-value way to keep a structure in use. Before we quote, we inspect the fabric or foil, the steel, the fixings and any air handling units, and check that the existing structure can carry the new membrane under today’s loading codes.
We keep records of every structure we have built, including drawings and cutting patterns, so a replacement can be made quickly. For structures built by other companies, we survey on site and pattern new fabric or cushions to fit.
Changing a structure’s shape takes more care, because every fabric panel helps to hold up the others. We model the whole canopy first to see how it will behave. In 2017, when McArthurGlen extended its Ashford outlet, we removed the part of the canopy over the food court, kept the rest of the membrane intact and in tension, and added two curved runs of canopy to form a new entrance (Ashford canopy extension).
A few of the refurbishment jobs we have carried out, on structures we built and on structures built by others.
What you can see on the structure is a good first guide. An inspection report then confirms which option fits, and what it will cost.
| What you see | What it usually means | What we usually do |
|---|---|---|
| Small holes, tears or a loose fixing | Local damage; the rest of the fabric is sound | Repair on site, often in one visit |
| Dirty or discoloured fabric that is still taut | Surface dirt, not the end of the fabric’s life | Professional cleaning, as part of maintenance |
| Slack or creased fabric, or water ponding | The fabric has lost tension, or a fixing or cable has moved | Re-tension and check the structure |
| Cracked or crazed coating, or failing seams | The fabric is near the end of its life | Re-skin on the existing frame |
| ETFE cushions that sag or will not stay inflated | A hole in the foil, a failed seal or a worn air handling unit | Repair the foil, or replace cushions or the air handling unit |
| Too dark, too hot or too noisy, or the building is changing | The structure no longer suits how the space is used | Upgrade or modify the structure |
| Material | Typical life |
|---|---|
| PTFE glass | 30+ years |
| PVC polyester | 15–30 years, by grade |
| Silicone glass | 20–25 years |
| ETFE foil | 30+ years |
Life figures: Architen Landrell materials pages. Regular maintenance helps a structure reach the top of its range.
We inspect the fabric or foil, steel, fixings and air handling units, and send an illustrated report with the options and a price for each.
Book an inspectionWe check the existing structure under today’s loading codes and pattern the new fabric or cushions from our records or a new survey.
Find out moreNew membranes, cushions and panels are cut and welded in our factory in Chepstow.
Find out moreOur crews work at night, in school holidays or in phases where needed, so the building can stay in use.
Find out moreA maintenance plan of inspections, cleaning and re-tensioning keeps the new skin in good order.
Find out moreUsually, yes. Steel frames, masts and cables normally outlast the fabric they carry. We inspect the steel and fixings, check the structure under current loading codes, and make the new membrane to fit. At the London Eye, the existing steel and all of the fixings were reused.
It depends on the fabric. PVC polyester typically lasts 15 to 30 years depending on its grade, silicone glass 20 to 25 years, and PTFE glass and ETFE more than 30 years. Regular maintenance helps: the fabric over our own factory lasted 30 years, and a school gymnasium roof we re-skinned in 2012 had stood since 1979.
Yes. We survey the structure, measure it and pattern new fabric or cushions to fit. At the University of Hertfordshire we replaced an ETFE roof built by another company nearly 20 years earlier, and at Collingwood School we re-skinned a fabric roof first put up in 1979.
Often, yes, when more daylight is wanted. At Aurora House in London we replaced a PVC fabric roof that had stood for almost 20 years with five three-layer ETFE cushions on a new steel ring beam and arches, and recycled the old steel and fabric.
Yes. Options include cushions with an extra layer for insulation, fritting or printing to cut glare and solar gain, rain noise suppression layers, and new air handling units. In 2026 we upgraded a school’s ETFE roof in south-west London with a rain noise suppression layer and a reconditioned air handling unit, working in the school holidays.
In most cases, yes. We plan the work around the building: at night, at weekends, in school holidays or in phases. At the London Eye we fitted the new canopy panels at night over two weeks, and at McArthurGlen Ashford we replaced the roof membrane in sections, with some of the work at night.
We recycle it wherever we can, and sometimes find it a second use. The old fabric and steel from Aurora House were recycled, and one old canopy was given to a group restoring a steam locomotive, to shelter the work.
It depends on the size and material, how much of the existing structure can be reused, access and plant, and when the work can be done. Night or phased working adds cost but keeps the building in use. After an inspection we give a price for each option, so you can compare repair, re-skinning and replacement.
Book an inspection using the form below, or send photos, drawings and the location to maintenance@architen.com. If we built the structure, tell us its name or roughly when it was built and we will find our records.
Send us photos, drawings or a short description, and the name of the structure if we built it, and one of our team will come back to you.
"(Required)" indicates required fields