Projects > Come Home Again, Tate Modern 2022




Come Home Again was a sculpture by the artist Es Devlin, commissioned by Cartier, that stood in the garden of Tate Modern in London from 22 September to 1 October 2022. It was a one-third scale model of the dome of St Paul’s Cathedral, cut open to reveal Devlin’s drawings of 243 of London’s endangered species, and it hosted choral performances. Stage One built the sculpture, and Architen Landrell designed, made and helped install the white PVC fabric panels that clad it: more than 60 made-to-measure panels in 13 types, about 270m² of fabric.
The sculpture stands on a steel frame of curved ribs. We patterned and made separate panel types for the outside and inside of the dome, the lower and middle walls, the inner walls and the balustrade, each shaped to its part of the frame. The panels were fixed to the steel and tensioned with ratchet straps, so the fabric sits tight and smooth. Door panels have a zip down each side and hook-and-loop tape along the bottom, so they open fully.
Stage One test-built the sculpture at its base in Tockwith, North Yorkshire, before taking it down and rebuilding it at Tate Modern. We made mock-up panels for the test build, fitted them on site and fine-tuned the details, including the door panels, before the full set was made. The panels left Chepstow at the end of August 2022, and one of our installers joined Stage One’s crew at Tate Modern in September to fit and tension them.
The white fabric gave the sculpture a clean, even skin that framed Devlin’s drawings and the light inside. The sculpture was designed to be taken apart after the show, with its steel recycled. See more of our temporary structures for ceremonies, launches and art, and another Tate Modern project, the Lightframe fabric ceiling.
What fabric is used to clad sculptures and art installations?
Usually a white PVC-coated polyester. It is strong, takes light evenly, can be printed and welded, and can be shaped to complex curves. For a finer or see-through finish, mesh or stretch fabric is used instead.
How are fabric panels fixed to a steel frame?
With keder edges in aluminium tracks, laced or strapped edges, or zips and hook-and-loop tape where a panel has to open. Each panel is tensioned so the fabric sits smooth and does not flap in the wind.
Can a fabric-clad installation be test built first?
Yes, and for a one-off piece it is worth it. For Come Home Again, mock-up panels were fitted at the test build, so the details were proven before the full set was made.

The City of Westminster Council on behalf of the Mayor and Citizens of Westminster approached...

Opened in June 2016 as the Switch House and renamed the Blavatnik Building in 2017,...

Printed fabric cladding for a temporary climbing venue in France In 2024, an international competition...