Skip to content
The Doha Showcase Stadium at dusk, its two half-domes lit from inside
Retractable roofs

Retractable & moving roofs

Architen Landrell designs, makes and installs fabric and ETFE roofs that slide, fold, roll or turn, for rooftops, courtyards, terraces, stadiums and stages. We make the membrane and steelwork in Chepstow, UK, and work with specialist partners on the drives and controls.

Reviewed by Christopher Rowell, Managing Director Updated October 2026

Doha Showcase Stadium ยท Doha, Qatar
Already have a moving roof? Inspection, maintenance & upgrades
Overview

What is a retractable roof?

A retractable roof is a roof that opens and closes. Its covering, usually fabric or ETFE, is carried on frames, cables or arms that slide, fold, roll or turn, moved by motors or by hand. Open, the space is outdoors; closed, it is sheltered from rain, sun or wind.

Most of the engineering is in the parts you donโ€™t see: the tracks, drives, sensors and controls that move the roof safely, park it in high winds and keep it working for years. When it is closed, a moving fabric roof has to be tensioned like any fixed one, so it sheds rain and snow instead of sagging; our guide to tensile structures explains why pre-stress matters.

4 ways
to move a roof: it slides, folds, rolls or turns
Seconds
for light folding panels to open or close; large roofs take longer
PVC
polyester folds well, so it is the usual fabric for folding and roll-up roofs
ETFE
and glass-based fabrics go on rigid frames that slide or turn rather than fold
Wind limit
every moving roof has one, and a wind sensor closes or parks it first
Fire alarm
signals can open or close the roof, as the buildingโ€™s fire strategy sets
The rooftop five-a-side pitch at Hotel Football, Manchester, under its white fabric roof panels, with the city beyond
Retractable rooftop roofs

Football nine floors up, open to the sky

At Hotel Football in Manchester, two fabric panels and their frames slide back at the touch of a button to open a 12.5 m ร— 12 m rooftop pitch, 200 m from Old Trafford. Rain on the way? They close again.

Hotel Football ยท Manchester, UK
What we build

Rooftop roofs, canopies, stadium roofs and moving walls

Each moving roof is designed around how the space will be used: how often it opens, how quickly, and in what weather. These are the ones we are asked for most.

  • The fabric roof panels over the rooftop pitch at Hotel Football

    Rooftop and courtyard roofs

    Fabric or ETFE panels on frames that slide back on tracks, turning a roof terrace, courtyard or pitch into outdoor space. At Hotel Football in Manchester, two panels open the rooftop pitch at the touch of a button.

  • Fabric awnings over the Southern Terrace restaurants at Westfield London

    Retractable canopies and awnings

    Fabric that extends or folds back over terraces, restaurants and shopfronts, by motor or by hand, so the shade is there only when it is needed. At Westfield Londonโ€™s Southern Terrace, a motorised section extends the shade as the sun drops.

  • The Doha Showcase Stadium beyond a giant football on the lawn

    Opening stadium and arena roofs

    Roofs that open a pitch or arena to the sky and close it again for heat, rain or wind. At the Doha Showcase Stadium, one half-dome rotates under the other to open about half the stadium; we made its 238 fabric hoods.

  • The PlayStation SingStar festival site with its fabric roof and stage canopy

    Event and touring roofs

    Roofs and walls for festivals, launches and tours that open, close or unfurl quickly and pack away between shows. For the PlayStation SingStar venue at Glastonbury, two 300 mยฒ panels pull back by hand in seconds. Fixed stages and event structures are on our Temporary structures page.

  • The steel-framed fabric wing at Baltic Mill, seen from below

    Kinetic shading and moving walls

    Fabric that follows the sun or slides across a facade to control light and heat. At Baltic Mill in Gateshead, a steel-framed fabric wing slides along the building to shade the gallery windows.

  • Fixed roofs

    Need a roof that stays put?

    Fixed fabric roofs for stadia and venues, and ETFE roofs and atria, have their own pages.

How retractable roofs work

Four ways a roof can move

Most moving roofs use one of four movements, or a mix of them. The right one depends on the span, how often the roof moves, where the covering goes when it is open, and how much sky you want to see.

Slide

Sliding roof: rigid frames carrying fabric or ETFE run on tracks and park at one end, leaving the rest open.

Rigid frames carrying fabric or ETFE run on tracks and park at one end, or pass over each other. Strong and weathertight; the parked frames still cover part of the space. As at Hotel Football.

Fold

Folding roof: fabric gathers into folds as its carriers run along cables or rails, like a curtain.

Fabric gathers into folds as its carriers run along cables or rails, like a curtain. Light and compact when open, so it suits long spans and terraces, as at the PlayStation SingStar venue.

Roll

Rolling roof: fabric winds onto a drum, or furls like a sail, when the roof opens.

Fabric winds onto a drum, or furls like a yacht sail. Neat when open, and best on flat or gently curved surfaces such as awnings and walls, as on the Rolling Stones stage.

Rotate

Rotating roof, in plan: one part turns about a pivot and slides under or around the other, opening part of the roof.

Part of the roof turns about a pivot, or slides around a ring, to open or to follow the sun, as at the Doha Showcase Stadium and the Jardine Insurance atrium.

Choosing a movement

Choosing a movement
Movement Best for When open Watch for
Slide Rooftops, courtyards, pitches Frames stack at one end Space for the parked frames; track length
Fold Long spans, terraces, events Fabric gathers into a compact bundle A fabric that takes repeated folding
Roll Awnings, walls, simple shapes Fabric wound onto a drum or furled Flat or gently curved surfaces only
Rotate Domes, round atria, sun tracking One part turns under or around another Large bearings or ring tracks

Diagrams are simplified. Every moving roof is engineered for its own site, span and use.

Materials for moving roofs

Fabric that folds, or rigid panels that slide: the movement decides the material.

  • PVC polyester

    Folds well, so it suits folding and roll-up roofs; translucent grades let light through, as at the SingStar venue.

  • Silicone glass

    Very good light transmission, on rigid frames that slide, as on the Hotel Football roof.

  • PTFE glass

    Long-lived and stays white; used on framed panels that slide rather than fold, as at Baltic Mill.

  • ETFE cushions

    The light of an ETFE roof on frames that move, for courtyards and atria. See ETFE roofs.

Drives and controls

What keeps a moving roof safe

A moving roof is a machine as well as a roof. We design the fabric, frames and tracks, and work with specialist partners on the drives and controls, so the whole system is designed together and agreed with you at the start.

Control loop of a moving roof: wind and rain sensors, a fire alarm signal and a push button or building management system feed a control panel, which runs the drive that moves the roof. Backup power keeps the panel and drive working in a power cut.

How the parts of a moving roof talk to each other. Sensors and links to the building management system (BMS) are chosen for each project.

Weather and safety

Weather and safety
Situation What the roof does
Wind Each roof has a wind speed above which it must not move. A wind sensor can close or park it automatically before that point.
Rain A rain sensor can close the roof at the first drops. Drainage is designed for both the open and closed positions.
Snow and ice The roof stays closed or parked, and is not moved until it is clear.
Power cut A backup supply (UPS) can keep the controls and drive running long enough to close the roof, or to open it for smoke ventilation.
Fire The controls can take a signal from the fire alarm. Whether the roof opens or closes in a fire is set by the buildingโ€™s fire engineer.
Drive failure A manual override can let staff secure the roof by hand.

Types of drive

Types of drive
Drive How it works
Rack and pinion A motor-driven gear runs along a toothed rack. Precise, for heavy sliding frames.
Chain and sprocket Motors pull the frames along with chains, for long tracks.
Cable and winch Cables wound by a winch pull fabric carriers along. Light and quick, for folding fabric.
Motor and drum An electric motor winds fabric onto a drum, for awnings and roll-up walls.
By hand Lines or cranks, for small or temporary roofs.
An Architen Landrell rope access technician working on a white fabric roof
Maintenance & repairs

Already have a retractable roof?

Moving roofs need regular checks to keep moving. Our maintenance team inspects, cleans and repairs fabric, frames and tracks, and works with drive and control specialists on the mechanism. A 24-hour response service is available for emergencies. We also look after moving roofs built by other companies.

  • Inspections of fabric, frames, tracks and fixings
  • Cleaning
  • Repairs on site, or new panels made in our factory
  • Re-tensioning
  • Drive and sensor checks with our control partners
  • Upgrades: new fabric, automation or sensors

Maintenance team: +44 (0) 1291 638 200 ยท maintenance@architen.com

For architects and clients

Planning and specifying a retractable roof

The earlier we are involved, the simpler the roof and its mechanism. These are the questions our engineers will ask, so it helps to have a view on them.

  1. What will the roof cover?

    The space, its size and the structure around it.
  2. How will the space be used?

    Open most of the time, or closed most of the time? Every day, or for events?
  3. How quickly must it open and close?

    Seconds for a stage set; longer is fine for a large roof.
  4. Where does the roof go when it is open?

    Room for parked frames, folded fabric or a drum.
  5. What weather must it handle?

    Wind, rain and snow at the site, and when it may move.
  6. Power, controls and fire strategy

    Links to the building management system, backup power, and the roofโ€™s role in a fire.
  7. Access for maintenance

    How tracks, drives and fabric will be reached for inspection.
Cutting table in the Architen Landrell factory in Chepstow
How we deliver

A UK maker of moving roofs, from first sketch to maintenance

We design, engineer, make and install the fabric and steelwork ourselves, with steel from our group company, Metafab Structures, and specialist partners for the drives and controls.

Since 1982
designing and building tensile structures
In-house
design, manufacture, installation and maintenance
6 continents
where our structures stand
9 welders
high-frequency and PTFE fabric welders in our Chepstow factory
FAQs

Retractable roof questions

Can’t see your question? Ask an engineer.
How does a retractable roof work?

The covering, usually fabric or ETFE, sits on frames, cables or arms that slide, fold, roll or turn. A drive moves it, controlled from a push button, the building management system or sensors, and the roof parks in a safe position when it is open.

Can a fabric roof open and close automatically?

Yes. Wind and rain sensors can tell the controls to close or park the roof, and it can be linked to the building management system or run on a timer.

What happens in high winds?

Each roof has a wind speed above which it must not move. A wind sensor can close or park it before that point, and the roof is designed to sit safely in that position.

What happens in a power cut?

A backup supply (UPS) can keep the controls and drive running long enough to close the roof. A manual override can also let staff secure it by hand.

Can a retractable roof be used for smoke ventilation?

The controls can take a signal from the fire alarm to open or close the roof. Whether it should, and how quickly, is set by the buildingโ€™s fire engineer as part of the fire strategy.

Which fabrics can fold?

PVC polyester folds well and is the usual choice for folding and roll-up roofs. Glass-based fabrics such as PTFE glass and silicone glass, and ETFE cushions, are used on rigid frames that slide or turn rather than fold.

How long does a roof take to open?

It depends on its size and drive. Light folding panels can move in seconds: the SingStar panels at Glastonbury pulled back by hand in seconds, and the Rolling Stonesโ€™ stage wall unfurled in seconds.

Does a moving roof need more maintenance than a fixed one?

Yes. As well as the fabric, the tracks, drives and sensors need regular checks. We agree a maintenance plan with you at handover.

Talk to an engineer

Planning a roof that opens, or looking after one?

Send us a sketch, drawings, photos or a short description and one of our engineers will come back to you.

+44 (0) 1291 638 200 mail@architen.com Architen Landrell, Station Road, Chepstow, NP16 5PF, UK

"(Required)" indicates required fields

Your enquiry is about(Required)
Accepted file types: jpg, jpeg, png, gif, pdf, dwg, dxf, Max. file size: 128 MB.
Call us Enquire