Stadium and grandstand cladding
Roofs, backs and gables of stands in fabric that takes tight curves. At Alexander Stadium, Birmingham, a light grey skin wrapped a new grandstand in 2011.
Architen Landrell designs, makes and installs fabric cladding for stadia, buildings, car parks and bridges: flat and shaped panels, mesh screens, brise soleil and printed facades. Panels are made in our factory in Chepstow, UK.
Reviewed by Ceri Richards, Head of Design Updated October 2026
Fabric is much lighter than glass, metal or GRP, so the structure behind it can be lighter too, and it takes curves that would be costly in rigid materials. Panels are made in our factory and fitted in large pieces, so time on site is short. Mesh lets air and light through; solid fabric keeps the weather out. Both can be coloured, printed or lit. A tensioned cladding panel works like a small fabric roof turned on its side: it needs enough pre-stress to stay taut and crease-free in the wind, as our guide to tensile membrane design explains.
A few of the facades, grandstands, car parks and bridges we have clad in fabric in the UK and around the world.
Roofs, backs and gables of stands in fabric that takes tight curves. At Alexander Stadium, Birmingham, a light grey skin wrapped a new grandstand in 2011.
Panels that hide plant and industrial facades but let air through. On the International Broadcast Centre, 33 mesh panels screen the plant.
A new face for a multi-storey car park without rebuilding it. In Stratford, 11 fabric sails, lit from below, front the car park.
Fabric carries a print at the scale of a building. In Liverpool, a sculpted printed wrap surrounds a 36 m video wall.
Fabric shades that cut solar gain and glare. PTFE glass brise soleil shade two faces of the Eton College boathouse at Dorney Lake.
ETFE cushion and single-layer facades, like the Kelana Jaya LRT tunnel in Kuala Lumpur, are on our ETFE page.
Fabric can give a stand the sculpted look of GRP or metal for much less. At Lord’s, WilkinsonEyre wanted the new Compton and Edrich Stands to match the Media Centre, whose shell is made of GRP panels, each a different shape.
Repeating that in GRP across two much larger stands would have been very expensive. We made the roof and facade from over 1,300 m² of PVC polyester instead: lighter on the structure, quicker to install and much less costly. For a seamless line off the back of each stand, the fabric meets an aluminium bullnose folded in two directions, and on site our crew used augmented reality to check the brackets on the timber gridshell against the model.
Much lighter than GRP, metal or glass, so the structure behind it can be lighter
Made in our factory in large panels, so installation is quick
Takes double curves and sculpted forms that are costly in rigid materials
Solid fabric keeps the weather out; mesh lets air and light through
Can be temporary: the London 2012 Aquatics Centre wings came down after the Games
Phthalate-free PVC fabrics, as used on the London 2012 venues
Lord’s: 1,300 m² of PVC polyester roof and facade framing the upper tiers
London 2012 Aquatics Centre: flat panels up to 250 m² on a 50 m high wing
Alexander Stadium: curved panels on the roof and gable, with a scalloped edge
Jakarta Velodrome: fabric roof with an acoustic liner beneath
The velodrome’s walls were designed as flat panels. We added shape to help the fabric carry its loads: each panel slides into place, then a shaping bar is pushed into the back of the fabric and tensioned, giving it a three-dimensional form. We mocked the detail up in the UK for the architect and client to sign off, it made installation very quick, and we have used it on several projects since.
Fabric can give a tired or industrial building a new face without rebuilding it. It fixes to the existing frame, hides plant and services, and can be changed later when the building or its brand changes.
Fabric is a cost-effective, low-maintenance way to change how a building looks straight away. Send us photos and elevations, and we will show you how it could work.
Fabric shades cut glare and solar gain on glazed facades. A fabric brise soleil stops the sun outside the glass, before it heats the rooms behind.
Send us the elevations and which way the glazing faces, and we will propose a shade.
Fabric can carry a brand, an artwork or a message at the scale of a building, and the print can be changed when the brand or the event changes.
The ink is driven into the fabric with heat, so it stays bright, does not scratch off and survives the fabric being taken down and used again.
Ink sits on the surface: economical for banners and short-term branding, but not made to be reused.
Artwork is drawn flat, but fabric stretches when it is tensioned. We shape the image to each panel’s cutting pattern and allow for the stretch, so it reads as one picture across every join.
For an edge-to-edge print, the keder that holds each panel is welded to the back, with care so the heat does not mark the image on the front.
Prints in sunlight need UV-stable dyes; prints inside a building do not.
Image size and resolution, lighting, whether you need to see through it, how long it must last and the fire rating all decide the fabric and the method.
The fabric sets the look, how much light and air pass through, how long the cladding lasts and its fire classification. For London 2012 we used PVC fabrics made without phthalate plasticisers, which are easier to reuse. We will recommend a fabric for your building.
| Fabric | What it does | Used at |
|---|---|---|
| PVC polyester | Strong, economical and easy to shape; white, colours or printed; 15–30 years, depending on the grade | Lord’s, Alexander Stadium, Aquatics Centre, Stratford car park |
| PVC polyester mesh | Open weave that lets air and light through and screens the view; can be printed | International Broadcast Centre, Aquatics Centre |
| PVC glass | Glass-fibre cloth with a PVC coating: stiffer and more stable than polyester, so tall flat panels stay true; translucent or blockout; can reach non-combustible classes | Australia Pavilion, Expo 2025: walls up to 16.5 m |
| PTFE glass | Glass-fibre cloth with a PTFE coating; self-cleaning and long-lasting, 30+ years | Eton College boathouse, Plashet School Unity Bridge |
| Silicone glass | Translucent glass-fibre cloth with a silicone coating; about 20–25 years | Ask us where it suits your facade |
| ETFE foil | Clear or printed foil, as cushions or single layers | Olympic Park bridge window; ETFE facades have their own page |
Source: Architen Landrell project and material pages. Design life depends on the fabric grade, the exposure and maintenance.
Our maintenance team cleans, re-tensions and repairs fabric cladding, and makes new or re-printed panels in our factory. We keep records of every structure we have built, so we know each one’s fabric and details.
Maintenance team: +44 (0) 1291 638 200 · maintenance@architen.com
The earlier we are involved, the simpler the fixings and the cheaper the steelwork. These are the questions our engineers will ask, so it helps to have a view on them.
Panel layout, patterning, fixings and loads, from concept to construction drawings.
Find out moreCut, printed and welded in Chepstow, with large panels made in our clear-span factory.
Find out moreSupport structures from our group company, Metafab Structures.
Find out moreOur own site teams, including IRATA rope access technicians for work on tall facades.
Find out moreCleaning, re-tensioning and replacement or re-printed panels.
Find out moreArchitectural fabric tensioned over the outside of a building, as flat panels, shaped panels or open mesh. It gives a building a new face, screens plant, shades glazing and can carry a print.
Fabric is much lighter, so the structure behind it can be lighter, and it takes curves that are expensive in rigid materials. At Lord’s, fabric matched the look of a GRP shell for much less, and was quicker to install.
Yes. Panels fix to the existing frame or to new steelwork, as on the International Broadcast Centre and the Stratford car park. We check what the structure can carry first.
Yes. We print artwork, logos and images onto the fabric, often by dye sublimation so the print lasts and the panels can be reused. Prints outside use UV-stable dyes.
It can. Mesh fabrics let plant ventilate and daylight in while they screen the view; solid fabrics keep the weather out. We choose the openness for what you need.
It depends on the fabric: PTFE glass 30 years or more, PVC polyester 15 to 30 years depending on the grade, silicone glass about 20–25 years and mesh fabrics 15–20 years, with the right maintenance.
Fabrics are tested to fire standards, and the fire regulations a facade must meet can change which fabric we use. On the Australia Pavilion at Expo 2025, Japan’s rules allowed PVC polyester on the feature facade and the top layer of the roof cushions, but the walls and the lower cushion layer had to be certified non-combustible (Funen), so they are PVC glass. That is one reason to involve us early: we will help you understand the requirements for your building.
Yes. The London 2012 Aquatics Centre wings came down after the Games and their fabric was recycled, and the Olympic Park bridge cladding was designed as temporary too. Demountable and event structures are on our Temporary structures page.
Send us a sketch, drawings, photos or a short description and one of our engineers will come back to you.
"(Required)" indicates required fields