Entrance canopies
Canopies that keep a doorway dry and mark the way in. At the Royal Armouries in Leeds, a twin-coned fabric canopy on a single steel mast frames the entrance to the Tiltyard.
Architen Landrell designs, makes and installs tensile fabric canopies for building entrances, covered walkways, bus and rail stations, airports and hospital drop-offs. Each one is engineered for its site and made in our factory in Chepstow, UK.
Reviewed by Ceri Richards, Head of Design Updated October 2026
A canopy is often the first part of a building people see. It marks the way in, gives a busy place an identity and, lit at night, becomes a landmark of its own. Almost every fabric canopy is built from three basic shapes, the hypar, the cone and the arch, or a mix of them; our guide to tensile canopy shapes explains how each one carries rain, snow and wind.
A few of the canopies and covered walkways we have designed, made and installed in the UK and around the world.
Canopies that keep a doorway dry and mark the way in. At the Royal Armouries in Leeds, a twin-coned fabric canopy on a single steel mast frames the entrance to the Tiltyard.
Dry, daylit routes between buildings. At Evelina Children’s Hospital in London, a fabric walkway links a Victorian hospital building to the new children’s hospital.
Shelter for passengers that stands up to traffic, crowds and weather. At Stratford bus station, uplit PTFE cones channel rain into drains at their base and stay bright after years of traffic fumes.
Canopies tall enough for ambulances that need little maintenance. At Downe Hospital, one canopy leans out over the road so high vehicles can pull up close, and a second shelters the walkway.
A landmark for passing traffic and shelter for visitors. At North Road, Preston, four inverted umbrellas join into one canopy and carry rainwater down their columns.
Free-standing shade for schools, courtyards and terraces has its own page, and so do ETFE canopies.
Most canopies use one of four forms, or join several together. The form decides how many supports you need, how the canopy meets the building and where the rain goes.
Fabric pulled up to a ring at the top of a mast, with cable edges between lower fixing points. A strong landmark over an entrance, as at the Royal Armouries and Ford Direct, Stevenage.
Fabric dips to a single column, so the canopy needs no other supports and rain runs down inside the column. Used at North Road, Preston and at Kingshurst Academy, where two offset umbrellas form the entrance.
Fabric stretched over a row of arches that repeats along the route. The natural choice for covered walkways, as at Edinburgh Airport and Sedgehill School.
Fabric carried on steel arms that reach out from the building or a line of columns, leaving the ground below clear, as at Sainsbury’s High Wycombe and Edmonton Green bus station.
Every canopy is designed with a route for its rainwater, so it lands where it should.
Inverted cones collect rain at the centre and take it down inside the column to a drain, as at North Road, Preston. At West Bromwich bus station, rain runs down the steel spars and inside the columns.
Most canopies shed rain to their low edges and corners. A gutter or diverter can carry it away from doors and paths.
The canopy slopes to a gutter beam along its low edge, as at Sainsbury’s High Wycombe, or leans to send water away from people walking below, as at Downe Hospital.
Diagrams are simplified. Every canopy is engineered for its own site, loads and drainage.
Designed and engineered in advance: ten bays go up in under 5 days.
Arched bays that follow curving routes and changes in ground level.
Branching arms on a single central column. Modular, so it can be shaped to fit the space.
A downward arch cantilevered from each column, along a building wall. Drainage can be included.
A rising arch cantilevered from each column. Also used as an amphitheatre canopy or bicycle shelter.
Each comes in PVC polyester, PTFE glass or silicone glass, on steel columns painted in any RAL colour, with lighting from our specialist lighting partners, graphics available and foundations by others. Ready-designed entrance and drop-off canopies, such as double conics, inverted conics and umbrellas, are on our Shade & shelter page with the full range.
The fabric sets the canopy’s life, light, look and cost. Our engineers will recommend one for your site and budget.
| Fabric | Design life | Light and look | Best for |
|---|---|---|---|
| PTFE glass | 30+ years | White or coloured; rain washes it clean | Transport hubs, hospitals, landmark entrances |
| PVC polyester | 15–30 years, by grade | Many colours; can carry a logo or print; lacquer or nano top coats help it shed dirt | Walkways, schools, shops and showrooms, demountable canopies |
| Silicone glass | 20–25 years | Bright white and available in colours; up to 42% light in white | Bright canopies and walkways |
| ETFE | 30+ years | Clear or printed; about 1% of the weight of glass | Bus and rail canopies that need lots of daylight |
Source: Architen Landrell materials pages.
Our maintenance team inspects, cleans, repairs and re-skins fabric canopies, with a 24-hour response service for emergencies. We keep records of every structure we have built, so we know each canopy’s fabric and details. We also look after canopies built by other companies.
Maintenance team: +44 (0) 1291 638 200 · maintenance@architen.com
The earlier we are involved, the simpler the canopy and its foundations. These are the questions our engineers will ask, so it helps to have a view on them.
Form-finding, patterning, wind and snow loads, drainage and connection details, from concept to construction drawings.
Find out moreCut and welded in Chepstow on our seven high-frequency and two PTFE welders.
Find out moreSupport structures from our group company, Metafab Structures.
Find out moreOur own site teams tension the fabric, including IRATA rope access technicians.
Find out moreA yearly inspection, with cleaning and re-tensioning as needed.
Find out moreA lightweight roof of architectural fabric, such as PTFE glass or PVC polyester, pre-stressed into a curved shape between masts, arches, cables or a building. The shape keeps the fabric taut, so it can cover an entrance, a walkway or a bus bay with very few supports.
PTFE glass has a design life of more than 30 years and rain washes it clean, so it suits transport hubs, hospitals and landmark entrances. PVC polyester costs less, comes in colours, can carry a logo and lasts 15 to 30 years, depending on the grade.
PTFE glass has a design life of more than 30 years. PVC polyester lasts 15 to 30 years, depending on the grade, and regular cleaning and inspection help both last longer.
Every canopy is designed with a route for its water: down inside the columns to a drain, into a gutter beam along a low edge, or off the edges away from doors and paths, with a gutter or diverter where needed.
Not every canopy needs it, so check with your local planning authority before you order. We can provide drawings and information to support a planning application.
We supply the engineering information to your groundworks contractor, so they can design and build the foundations. Our price usually covers the structure above ground.
Yes. We survey the existing steel and fixings, make new fabric panels to fit them in our factory, and fit them with as little disruption as possible, at night if needed.
We recommend an inspection every year, with cleaning as needed. A visit covers cleaning, repairs, a check of every fixing and fitting, and an inspection report.
It depends on the material, the design and how long it takes to make, so we don’t publish a budget price per m²: a single figure could be misleading. Send us drawings or a sketch and we will price your project.
Send us a sketch, drawings, photos or a short description and one of our engineers will come back to you.
"(Required)" indicates required fields