Skip to content
Aerial view of the Busan Asiad Main Stadium in South Korea with its scalloped white fabric roof
Tensile fabric roofs

Fabric roofs for stadia, venues & large spaces

Architen Landrell designs, engineers, makes and installs tensile fabric roofs for stadiums, indoor pitches, amphitheatres, markets and malls. Every membrane is cut and welded in our factory in Chepstow, UK, in PTFE glass, PVC polyester or silicone glass, and an insulated fabric roof can reach a U-value of 0.18 W/m²K.

Reviewed by Guy Monkley, Head of Sales Updated October 2026

Busan Asiad Main Stadium · Busan, South Korea
Already have a fabric roof? Maintenance, repairs and re-skinning
Overview

What is a tensile fabric roof?

A tensile fabric roof is a membrane, usually PTFE-coated glass fibre or PVC-coated polyester, pre-stressed between masts, arches or cables into a curved shape, so the fabric carries its loads in tension. It spans large spaces with far less steel than a conventional roof, and lets daylight through.

A single skin shelters stands, markets and outdoor venues. Add an inner lining and insulation, and the same roof can enclose a heated building such as a gallery, restaurant or sports hall. A fabric roof gets its strength from its shape: the membrane is pre-stressed into double curves so it stays taut under wind and snow, and does not pond, as our guide to the basic theories of tensile structures explains.

30+ years
design life of PTFE glass
15–30
years’ life for PVC polyester, depending on the grade
Up to 64%
of daylight through high-translucency PVC
0.18 W/m²K
U-value of an insulated Thermal roof
About 40%
less heat lost through a twin-skin roof than through a single skin
1,000 °C
heat the glass cloth in PTFE fabric withstands
The Compton and Edrich Stands at Lord's Cricket Ground, London, with their curved white fabric roofs, seen across the outfield
Stadium roofs and cladding

A fabric roof for the home of cricket

Over 1,300 m² of PVC polyester forms the curved roof and facade of the Compton and Edrich Stands at Lord’s, matching the look of the GRP Media Centre for a fraction of the cost.

Lord’s Cricket Ground · London, UK
What we build

Stadium roofs, pitch covers, venue, market and insulated roofs

Every roof is form-found and engineered for its site, span and use, in the fabric that suits it best. These are the spaces we cover most often.
  • White fabric canopies over the pavilion and stand at the Hampshire Rose Bowl

    Stadium and grandstand roofs

    Cantilevered and mast-supported canopies over stands, from a single grandstand to a whole bowl, shaped to keep spectators dry. At the Hampshire Rose Bowl, now the Utilita Bowl, white fabric canopies cover the pavilion and a 12,000-seat stand.

  • Oriam sports performance centre in Edinburgh with its white fabric roof over diagonal arches

    Indoor pitches and sports halls

    Clear-span fabric halls for football and rugby training: daylit, all-weather and quick to build, with no columns on the pitch. At Oriam in Edinburgh, 16 PVC polyester panels stretch over diagonal arches spanning 116 m by 76 m.

  • Aerial view of the Chene Park amphitheatre fabric roof beside the Detroit River

    Amphitheatres and performance venues

    Roofs over stages and seating that keep performers and audience dry, with acoustic linings where the sound matters. In Detroit we rebuilt the Chene Park roof in PTFE glass with acoustic baffles; it is now the Aretha Franklin Amphitheatre.

  • A single white fabric cone over the Limerick Milk Market, Ireland

    Markets, malls and food courts

    Large, bright covered spaces for shopping and eating, often built against existing buildings. At Limerick Milk Market a single fabric cone over 39 m across hangs from a mast almost 24 m tall.

  • The insulated fabric roof of the Chatham Maritime food court on its steel arch

    Insulated fabric buildings

    Fabric as the whole building envelope, insulated with our Thermal system for heated spaces such as galleries, restaurants and halls. It was first used at the Chatham Maritime food court, draped from a 60 m steel arch beside a Victorian boiler shop.

  • Moving roofs

    Need a fabric roof that opens?

    Retractable and moving fabric roofs, drives and controls are covered on their own page.

    Retractable roofs
Fabric roof systems

How fabric roofs work

A tensile fabric roof gets its strength from its shape. The membrane is pre-stressed into a double curve between masts, arches or cables, so it stays taut in wind and snow. Layers added beneath it decide how warm and quiet the space below will be.

Three basic shapes

Most fabric roofs use one of these shapes, or several joined together.

Cone

A cone-shaped fabric roof pulled up to a ring at the top of a central mast, with cable edges between low anchor points.

Fabric pulled up to a ring at the top of a mast, with cable edges between low anchor points. Repeated cones cover large areas, as at the Riyadh camel racing track.

Arch

A barrel-vault fabric roof: membrane stretched over a row of steel arches for a long clear span.

Fabric stretched over a row of steel arches. It gives long clear spans with no columns, which suits indoor pitches such as St George’s Park.

Saddle

A saddle-shaped fabric roof with corners alternately high and low, held by masts and cable edges.

Corners alternately high and low, held by masts and cable edges. The twist keeps the fabric taut, and the shape repeats easily for canopies and shade.

Build-ups and insulation

U-value in W/m²K: the lower the number, the less heat escapes.

Single skin

about 4.5 W/m²K
Section through a single-skin fabric roof: one tensioned membrane between steel supports.
  1. 1 Fabric membrane, PTFE glass or PVC polyester
  2. 2 Steel support: arch, mast, beam or cable

One tensioned membrane of about 1,200 g/m². Right for stands, canopies, markets and other spaces that are covered but not heated.

Twin skin

about 2.6 W/m²K
Section through a twin-skin fabric roof: an outer membrane and an inner membrane with a 200 mm air gap between.
  1. 1 Outer membrane
  2. 2 Air gap, about 200 mm
  3. 3 Inner membrane

A second membrane beneath the first traps a layer of air and cuts heat loss by about 40%. With an acoustic quilt between the layers, it also absorbs sound.

Thermal

0.18 W/m²K
Section through an Architen Thermal insulated fabric roof: outer membrane, a multi-foil insulation layer suspended beneath it, and a light inner lining.
  1. 1 Outer membrane, as on a normal fabric roof
  2. 2 Multi-foil insulation, suspended beneath
  3. 3 Light inner lining, smooth underside

Our insulated system: outer membrane, multi-foil insulation and a light inner lining. It meets Part L, so fabric can enclose heated buildings, as at the Serpentine Sackler Gallery.

Sources: Architen Landrell, Tensile fabric structures and performance; Thermal Tensile Fabric System.

System options

Each can be added to a single, twin or Thermal build-up, on new roofs and many existing ones.

  • LowE coating

    A metallic coating that works a bit like a thermos. In winter it reflects heat back down into the space; in summer it keeps solar gain out and helps the air conditioning. It can be set to keep some translucency. We used it on 238 fabric hoods at the Doha Showcase Stadium.

  • Acoustic lining

    Ecoustic is a dense, fire-rated soundproofing membrane hung beneath the roof, following its curve. It improves the sound in halls and venues, and suits demountable structures too.

  • Rain noise suppression

    Heavy rain can drum on a single skin of fabric. A suppression layer over the roof dampens the noise, and it can be added to an existing roof.

Materials

Choosing a fabric for your roof

The fabric sets the roof’s life, light, look and cost. We work in all the main architectural membranes, and our engineers will recommend one for your project.

Choosing a fabric for your roof
Fabric Design life Light and look Best for
PTFE glass 30+ years White or coloured; sunlight keeps white PTFE white and rain washes it clean Stadiums, landmark and long-life roofs, transport hubs
PVC polyester 15–30 years, by grade Up to 64% light in high-translucency grades; many colours; printable Stands, indoor pitches, venues, markets; folds for temporary and retractable roofs
Silicone glass 20–25 years Up to 42% light in white; blocks UV-B but lets plants grow Bright covers, planted spaces, insulated skins
ETFE foil 30+ years Up to 95% light; about 1% of the weight of glass Atria, rooflights, pools

Source: Architen Landrell materials pages.

Performance

Fabric roof performance data

Fabric roof performance data
Property Value
U-value, single skin About 4.5 W/m²K
U-value, twin skin with 200 mm air gap About 2.6 W/m²K
U-value, Thermal insulated system Down to 0.18 W/m²K, meets Part L
Light transmission Up to 64% (high-translucency PVC) · up to 42% (white silicone glass)
Design life PTFE glass 30+ years · PVC polyester 15–30 years, by grade
Weight of a single skin About 1,200 g/m²
Fire tests, Europe and UK EN 13501-1 reaction to fire (classes A1 to F, with smoke and droplet ratings); DIN 4102-1 in Germany; NF P92-503 in France; BS 7837 for textile structures in the UK
Fire tests, USA ASTM E84 / UL 723 surface burning (flame spread and smoke); NFPA 701 flame propagation of textiles; ASTM E108 / UL 790 fire tests of roof coverings
Fire class of a fabric Depends on the fabric and grade: we send the test certificates for the one we propose
Tensile and tear strength Tested to EN ISO 1421 and DIN 53363; we choose the fabric grade for the loads on each roof
Maintenance Inspection and cleaning; yearly re-tension check on very exposed sites

Source: Architen Landrell, Tensile fabric structures and performance; materials pages.

An Architen Landrell rope access technician cleaning a white tensile fabric roof
Maintenance & repairs

Already have a fabric roof?

Our maintenance team inspects, cleans, repairs and re-skins tensile fabric roofs on sites around the world, with a 24-hour response service for emergencies. We keep records of every structure we have built, so we know each roof’s fabric and details. We also look after roofs built by other companies.

  • Inspections and condition surveys
  • Professional cleaning
  • Repairs on site, or new sections made in our factory
  • Re-tensioning
  • New fabric fitted to the existing structure
  • Upgrades: insulation, LowE or acoustic linings
Our own factory, Chepstow. After 30 years we re-skinned the 12 fabric cones over our factory and insulated nine of them to 0.18 W/m²K.
Montage Mountain, Pennsylvania. We built this concert pavilion roof near Scranton, then rebuilt it after the 2007 blizzard.

Maintenance team: +44 (0) 1291 638 200 · maintenance@architen.com

For architects and clients

Planning and specifying a fabric roof

The earlier we are involved, the lighter the structure and the simpler the details. These are the questions our engineers will ask, so it helps to have a view on them.

  1. What will the roof cover?

    A stand, an indoor pitch, a market, a courtyard or a whole venue, and the clear span you need.
  2. Open-sided, or a heated building?

    A single skin suits open structures; a twin skin, or our Thermal system at 0.18 W/m²K, encloses heated buildings.
  3. Which fabric?

    PTFE glass, PVC polyester or silicone glass, chosen for life, light, colour and cost, as in the materials table above.
  4. Wind, snow and rain

    The loads at the site, and where the rainwater and snow will go: gutters, downpipes or off the edges.
  5. The supporting structure

    Masts, arches, cables or an existing building. Our group company, Metafab Structures, makes the steelwork.
  6. Light, sound and fire

    How much daylight should come through, whether an acoustic lining is needed, and the building’s fire strategy.
  7. Access and maintenance

    How the roof will be reached for inspection, cleaning and repairs.
Cutting table in the Architen Landrell factory in Chepstow
How we deliver

A UK fabric roof manufacturer, from first sketch to maintenance

We design, engineer, make, install and maintain every system ourselves, with steelwork from our group company, Metafab Structures.

Since 1982
designing and building tensile structures
In-house
design, manufacture, installation and maintenance
6 continents
where our structures stand
9 welders
high-frequency and PTFE fabric welders in our Chepstow factory
FAQs

Fabric roof questions

Can’t see your question? Ask an engineer.
How long does a tensile fabric roof last?

PTFE glass has a design life of more than 30 years. PVC polyester lasts 15 to 30 years, depending on the grade: an architectural PVC for a stadium roof lasts far longer than a lighter one made for a marquee. With inspection and cleaning both can last longer: the PVC roof over our own factory lasted 30 years.

Can a fabric roof be insulated?

Yes. Our Thermal system adds a multi-foil insulation layer and an inner lining beneath the outer membrane. It reaches a U-value of 0.18 W/m²K, which meets the Part L limit for the roofs of non-domestic buildings, so fabric can enclose heated buildings.

Is a fabric roof suitable for a windy or snowy site?

Yes, if it is properly engineered. Every roof is engineered for the wind and snow at its site, with steeper profiles and shorter spans where snow is heavy.

How does a fabric roof behave in a fire?

PVC fabric puts itself out when the flame is removed and does not drip. The glass cloth in PTFE fabric withstands up to 1,000 °C, and its seams part at about 270 °C, letting smoke and heat out.

Is a fabric roof noisy in the rain?

Heavy rain can drum on a single skin. A rain noise suppression layer over the roof, or an acoustic lining beneath it, reduces the noise.

PTFE or PVC: which fabric should I choose?

PTFE glass suits permanent landmark roofs that need a long life and a white finish. PVC polyester costs less, comes in colours and can be folded for temporary or retractable roofs.

How much daylight does a fabric roof let in?

It depends on the fabric and the build-up. High-translucency PVC lets through up to 64% of light and white silicone glass up to 42%. Insulation reduces the light that gets through.

Can you repair or re-skin an existing fabric roof?

Yes. Small repairs are made on site and larger sections are made in our factory. When the fabric reaches the end of its life we can fit new fabric to the existing structure, as we did on our own factory, and add insulation at the same time.

How much does a fabric roof cost?

It depends on the material, the design and how long it takes to make, so we don’t publish a budget price per m²: a single figure could be misleading. Send us drawings or a sketch and we will price your project.

Talk to an engineer

Planning a fabric roof, or looking after one?

Send us a sketch, drawings, photos or a short description and one of our engineers will come back to you.

+44 (0) 1291 638 200 mail@architen.com Architen Landrell, Station Road, Chepstow, NP16 5PF, UK

"(Required)" indicates required fields

Your enquiry is about(Required)
Accepted file types: jpg, jpeg, png, gif, pdf, dwg, dxf, Max. file size: 128 MB.
Call us Enquire