Skip to content
The white, curved Chanel Mobile Art Pavilion by Zaha Hadid lit at night among trees, with blue light round its base
Temporary structures

Temporary, touring & event structures

Architen Landrell designs, makes and installs fabric stages, pavilions, inflatables and demountable venues for tours, festivals, ceremonies and launches. We work to fixed dates, test-build at our Chepstow factory, and take structures down again afterwards.

Reviewed by Christopher Rowell, Managing Director Updated October 2026

Chanel Mobile Art Pavilion · Zaha Hadid Architects
Already have a structure? Repairs and re-erection
Overview

What is a temporary fabric structure?

A temporary fabric structure is a stage, pavilion, canopy, venue or sculpture made of architectural fabric on a light frame, or held up by air. It goes up quickly, comes down cleanly, and can often go up again somewhere else.

Fabric is light and packs small, so it suits tours and festivals. It needs only light foundations, such as ground anchors or water or sand ballast. Well-made PVC polyester lasts for decades, so the same canopy can be stored over winter and used year after year. When a structure is no longer needed, the fabric can be reused or recycled. Whether it is tensioned over a frame or held up by air, the fabric only works when it is curved in two directions; our guide to tensile structures explains how both kinds carry their loads.

15–30
years’ life for PVC polyester, and longer on a structure that is only up a few weeks a year
Minutes
for an inflatable to go up; it packs small and needs little or no steel
Blackout
PVC polyester for stages and screens, or white and colours that glow when lit
Printed
with artwork or branding; two layers keep inside and outside images separate
Reusable
taken down, cleaned and stored, a canopy can go up again next season or on a new site
Recyclable
fabric that is no longer needed can be recycled into new material
The giant mirrored disco ball hanging from a crane over the Bestival crowds at dusk
Inflatables

The world’s largest disco ball

For Bestival 2014 we engineered and made an inflatable disco ball 10.33 m across, designed by Newsubstance. A black PVC skin, wrapped in a net carrying thousands of small mirrors, hung from a 100-tonne crane over the crowds and set a Guinness World Record.

Bestival · Isle of Wight, UK
What we build

Stages, venues, inflatables, ceremony pieces and seasonal canopies

An event structure has to look right on the day, go up and come down safely in the time available, and survive the journey to the next site. These are the things we are asked to make most.
  • The Rolling Stones Licks tour stage, with tall printed fabric banners and the band’s lighting rig

    Stages and tour sets

    Fabric that clads stage steel, shelters performers and carries the show’s artwork. For the Rolling Stones Licks tour, a 61 × 18 m printed wall unfurled in seconds every night.

  • The Desperados bar, a cube clad in printed fabric artwork, lit at sunset at a festival

    Touring venues and bars

    Venues that pack into trucks and go up at the next festival. The Desperados bar for Heineken is a 10 m cube with different printed artwork inside and out.

  • The white 44 m inflatable Qatargas dome beside a lake and fountain at Ras Laffan

    Inflatable structures

    Air-filled cushions, domes and sculptures that go up in minutes. The 44 m Qatargas dome was made of 16 inflated PVC cushions, and the London 2012 athletes’ tunnel inflated or deflated in under three minutes.

  • A performer in a wheelchair on top of a giant painted inflatable apple at the London 2012 Paralympic opening ceremony

    Ceremonies, launches and art

    One-off pieces made to a fixed date: the hand-painted inflatable Paralympic apple for London 2012, and the 80 white PVC panels of Es Devlin’s Come Home Again at Tate Modern.

  • The white fabric canopy over the audience in the lower bailey of Chepstow Castle

    Seasonal and festival canopies

    Canopies that go up for a season and come down again. The 300 m² Chepstow Castle canopy shelters an open-air theatre audience for six weeks a year.

  • Permanent structures

    Need a roof that stays?

    Permanent fabric roofs, canopies and shade structures, including stage canopies for parks and theatres, have their own pages.

Stages and tours

Stage roofs and touring stage cladding

A touring stage is built and taken down again in every city, often in a few days, and has to look the same each time. Fabric is light, packs small and goes up fast, so it is used for stage roofs, cladding, backdrops and screens, and it can be fully blackout.

For the U2 360° tour, we clad Mark Fisher’s steel “Claw” in groups of multi-conic fabric membranes. The order was placed only nine weeks before the first fitting in Barcelona, so the design had to be right first time. We also make the roof and wall sheets for modular touring and festival stages, used on the Pink and Harry Styles stadium tours, at Eurovision in Liverpool and at Radio 1’s Big Weekend. We have also made the printed wall for the Rolling Stones, the clad stage for the LIFT festival and the fabric skin of Soundforms, a mobile acoustic shell for orchestras.

What stage fabric does
  • Covers the steel and shelters performers and equipment from rain and sun

  • Patterned to fit complex stage geometry, in fabric made to the colour the show needs

  • Blackout fabric where no light may pass, for stage roofs, backdrops and screens

  • Printed with artwork or branding, and lit from front or behind

  • Moving parts, such as banners that unfurl and drapes that rise, built from marine and yacht fittings

  • Packed in its own travelling cases, so it goes up and comes down the same way at every show

  • Designed with stage designers, engineers and staging contractors to the tour’s dates

  • Close view of white fabric membranes over curved steel on the U2 360° stage, against the sky

    U2 360° tour: PVC polyester blackout fabric in the band’s chosen colour

  • The huge printed fabric wall across the front of the Rolling Stones Licks tour stage

    Rolling Stones Licks tour: a 61 × 18 m printed wall that furls away like a sail

  • The LIFT festival stage, a tall portable theatre clad in patterned printed fabric

    The LIFT, London 2008: a portable theatre by AOC Architects in printed fabric

  • An orchestra playing inside the white fabric Soundforms shell at night

    Soundforms: an acoustic shell for outdoor concerts, put up with little heavy plant

Air-supported fabric

Inflatable structures

Air gives fabric its shape and strength. An inflatable can be a tunnel or a dome made of airtight cushions, or a sculpture held up by a fan. It packs into a small space, goes up in minutes and needs little or no steel. We design the shape, pattern and weld the fabric, and work out the fans and controls that keep it inflated.

  • The inflated white athletes’ tunnel on the track inside the London 2012 Olympic Stadium

    London 2012 athletes’ tunnel

    A 33 m tunnel of linked air-filled cushions, grey outside to avoid glare on television and white inside with LEDs. Eight air handling units inflate it in under three minutes.

  • The giant clear snow globe over Eros at Piccadilly Circus, with a red double-decker bus passing

    Eros snow globe, Piccadilly Circus

    685 m² of clear PVC made a 15 m globe over Eros for Christmas 2013. Two fans, running in turn, kept it pressurised, and we test-built it in our car park first.

  • The giant mirrored disco ball hanging over the Bestival crowds at night, lit by searchlights

    Bestival disco ball

    A black PVC sphere wrapped in a net of mirrors. A small fan under the head ring, switched on by a sensor, kept the world-record ball inflated.

  • The Channel 4 Big 4 sculpture clad in inflated fabric shapes, glowing red and orange at night

    Channel 4 Big 4, London

    For artist Hannah Gourlay, the Big 4 outside Channel 4 slowly “breathed” in and out, its inflated fabric gently pulsing with light.

  • The purple Udderbelly venue in Edinburgh, with its inflatable cow’s head and legs above the roof

    Udderbelly, Edinburgh

    An upside-down purple cow for the Edinburgh festival: a tensile fabric venue whose legs, head and udders are self-supporting inflatables.

  • A giant hand-painted inflatable apple on stage at the London 2012 Paralympic Opening Ceremony

    Paralympic apple, London 2012

    Two inflated halves of hand-painted PVC polyester, on a rotating steel frame, made the giant apple for the Paralympic Opening Ceremony. A hand-held fan inflated it.

Pavilions and venues

Fabric pavilions and event venues

A fabric pavilion gives an event a building of its own: a landmark, a hall, a bar or a place to meet. Fabric spans wide without columns, takes almost any shape and colour, and comes apart into loads that fit on a lorry.

  • Chanel Mobile Art Pavilion: Zaha Hadid’s touring pavilion went from Hong Kong to Tokyo and New York; we made its insulated fabric liner and PVC roof with ETFE rooflights.
  • Skyscape, Greenwich: a fabric-clad venue for the year 2000 with two 2,500-seat cinemas.
  • KAUST, Saudi Arabia: two ceremony halls clad in 22,000 m² of fabric, installed by a team of ten in six weeks, then taken down and brought home.
  • Qatargas dome, Ras Laffan: a 44 m dome of 16 inflated PVC cushions on a steel frame, made for one inauguration in 2009.
  • Australia Pavilion, Expo 2025 Osaka: 8,500 m² of fabric facade and cushion roof on a steel frame reused from an earlier venue in Tokyo. It sits on the ground with no permanent foundations, so it can be taken down and rebuilt.
  • Temporary climbing venue, Paris, 2024: 1,500 m² of printed fabric cladding on the steel frame behind the climbing walls, one image across 11 panels up to 32.25 m long. After the competition the venue was taken down and its frame reused.
  • Serpentine pavilions: the ETFE of SelgasCano’s 2015 pavilion, the black roof membrane of Frida Escobedo’s 2018 pavilion and the fabric roof of Sir Peter Cook’s Play Pavilion with LEGO.
  • Google on the Beach, Cannes Lions: white fabric roofs and sail canopies for a 900 m² beach venue.
Lili Pavilion, a modular fabric pavilion on a raised deck

Lili Pavilion

A modular fabric pavilion we developed with Flow State Fabric: 20 × 10 m and 4.2 m high, on a self-supporting frame and rigid deck. The canopy collects rainwater and stores it in the deck, which is also part of the structure, so it needs no drainage or foundations. Units join to make larger spaces, and it suits historic and sensitive sites.

Lili Pavilion
Demountable and seasonal

Demountable structures, used again and again

A demountable structure is designed to be taken down, stored and put back up, for a summer season, a run of events or a move to a new site.

Fabric suits this well. A PVC polyester membrane lasts 15 to 30 years, depending on the grade, and longer still on a structure that is only up for a few weeks a year. We design structures to be put up and taken down many times, and our site teams can do both.

Light and few parts

Fewer, lighter masts and more tie-down cables, so the structure is quick to put up and easy to store.

Panels sized for handling

Fabric divided into panels a small crew can lift, fold and pack without damage.

Foundations to suit the site

Ground anchors, water or sand ballast, or permanent bases that stay in the ground between seasons.

Kind to the setting

At historic or sensitive sites it can be designed to put no load on the buildings around it, as at Opera Holland Park.

  • The large white fabric canopy over the stage and seating at Opera Holland Park

    Opera Holland Park, London

    A 1,600 m² canopy on four masts, put up every summer since 2007 and taken down for the winter. Light steel and small fabric panels make it easy to handle and store.

  • The London 2012 Water Polo Arena, wrapped in fabric, with its inflated cushion roof

    London 2012 Water Polo Arena

    An entirely demountable venue for 5,000 people, with an inflated fabric cushion roof and a fabric wrap.

  • White peaked fabric tents of the Kuwait conference centre among palm trees

    Kuwait conference centre

    Designed to be taken down and rebuilt, with a design life of at least ten years. At least one hall was kept on afterwards, as a theatre or reception space.

Materials

Choosing a fabric for an event structure

The fabric sets how the structure looks, how much light it lets in, how well it handles repeated folding and packing, and its fire rating. We will recommend one for your event.

Choosing a fabric for an event structure
Fabric What it does Used at
PVC polyester Strong, flexible and easy to fold; white, colours or blackout; welds airtight for inflatables Most of our event work: KAUST, U2 360°, Udderbelly, the athletes’ tunnel
Printed PVC polyester Printed with artwork or branding; two layers keep inside and outside images separate Paris climbing venue, Desperados bar, the LIFT, Rolling Stones, Qatargas canopy
Clear PVC Transparent film for windows and see-through forms Eros snow globe, windows at KAUST
PVC polyester mesh Open weave that lets wind and light through; can be printed London Festival of Architecture cone
Stretch fabric Lycra-based fabric for smooth curves, screens and projection IWM Duxford Flight Path, Lexus launch screens
ETFE foil Clear, light foil for rooflights and roofs Chanel Mobile Art Pavilion rooflights, Skyroom London

Source: Architen Landrell project pages.

Colour, light and print

An event structure is often part of the show.

An Architen Landrell rope access technician working on a white tensile fabric roof
Maintenance & repairs

Already have a structure?

Between events, our team can take your structure down, clean and repair it, make new panels, and put it back up for the next season or on a new site. We keep records of every structure we have built, so we know each one’s fabric and details.

  • Putting up and taking down, each season or event
  • Cleaning and drying the fabric before it is packed
  • Re-tensioning, so the fabric goes back up smooth
  • Repairs and replacement panels made in our factory
  • Inspection before the structure goes back up
  • Moving a structure to a new site

Maintenance team: +44 (0) 1291 638 200 · maintenance@architen.com

For designers, producers and event organisers

Planning and specifying a temporary or event structure

Event dates do not move, so the earlier we are involved, the more time there is to design, make and test. These are the questions our engineers will ask, so it helps to have a view on them.

  1. What is it for, and for how long?

    A single event, a tour, a festival season or several years. This sets the fabric, the frame and how it is put up.
  2. Will it move?

    How often it goes up and comes down, how it travels, and where it is stored between uses.
  3. The site

    Ground conditions, levels, access for vehicles and cranes, and whether anything can be fixed into the ground. Ballast, ground anchors and existing bases are all options.
  4. People and use

    How many people, under or inside it, and what happens there: a performance, a reception, an exhibition or a bar.
  5. Weather

    The season and how exposed the site is. We design for the wind and rain it will see while it stands.
  6. Fire and licensing

    The fire rating the fabric needs, escape routes, and what the venue or local authority will ask for.
  7. Power, light and sound

    Power for fans on an inflatable, lighting, rigging points for sound and video, and any acoustic needs.
  8. Dates

    The event date, and the time available to build and take down on site. We can test-build at our factory first.
Cutting table in the Architen Landrell factory in Chepstow
How we deliver

A UK maker of event structures, from first sketch to take-down

We design, engineer, make, install and take down every structure ourselves, with steelwork from our group company, Metafab Structures.

Since 1982
designing and building tensile structures
In-house
design, manufacture, installation and maintenance
6 continents
where our structures stand
9 welders
high-frequency and PTFE fabric welders in our Chepstow factory
FAQs

Temporary and event structure questions

Can’t see your question? Ask an engineer.
What is a temporary fabric structure?

A stage, pavilion, canopy, venue or sculpture made of architectural fabric on a light frame, or held up by air, designed to go up quickly and come down cleanly. Many are designed to be stored and used again.

How long does the fabric last?

PVC polyester lasts 15 to 30 years, depending on the grade, and longer on a structure that is only up for a few weeks a year, as long as it is cleaned, dried and stored properly. Fabric structures can last 30 years and more.

Does a temporary structure need foundations?

Usually only light ones. Ground anchors, water or sand ballast, or permanent bases left in the ground between seasons are all used. The Lili Pavilion stores rainwater in its deck, so it needs no foundations.

How quickly can you make one?

It depends on size and complexity. The U2 360° cladding was ordered nine weeks before its first fitting, the Eros snow globe went from concept to completion in under two months, and the Kuwait conference centre was built in little more than 100 days.

Do inflatable structures need fans running all the time?

Most do. Fans keep the pressure up, often with a second fan or a controller in reserve: the Eros snow globe had two fans running in turn, and a sensor started the disco ball’s fan when it was needed. We design the air supply with the structure.

Can you print on the fabric?

Yes. We print artwork, logos and images onto PVC fabric, and a double layer keeps the inside and outside images separate, as on the Desperados bar.

Do you test structures before the event?

Where we can, yes. We test-built the Eros snow globe in our Chepstow car park before it went to Piccadilly Circus, and the athletes’ tunnel was designed, made and tested before delivery.

What happens to the structure afterwards?

We can take it down and put it back up next season or on a new site. At Kingly Court, a listed courtyard off Carnaby Street, our three Tenara cones went up for events and came down afterwards, leaving the courtyard clear to meet planning rules. When it is no longer needed, the fabric can be recycled, as the 25,000 m² from the London 2012 Aquatics Centre was.

Talk to an engineer

Planning a temporary or event structure, or reusing one?

Send us a sketch, drawings, photos or a short description and one of our engineers will come back to you.

+44 (0) 1291 638 200 mail@architen.com Architen Landrell, Station Road, Chepstow, NP16 5PF, UK

"(Required)" indicates required fields

Your enquiry is about(Required)
Accepted file types: jpg, jpeg, png, gif, pdf, dwg, dxf, Max. file size: 128 MB.
Call us Enquire